Polymer additives for Agriculture

ITZ-458 by Ingenia is a UV masterbatch. It contains an optimized blend of high-performance stabilization additives in an LLDPE carrier resin with good chemical resistance. It enhances the performance of agricultural films during outdoor exposure, even when exposed to aggressive agrochemicals such as pesticides, insecticides and soil disinfectants.

• It is designed for blown- and cast film, sheet extrusion and film coating.
• It is free of animal-based ingredients.
• It is recommended for agricultural applications such as greenhouse film, mulch film, tunnels, geotextiles, silage wrap, shade cloth, bale wrap and shrouds.
• It is suitable for LDPE, LLDPE and HDPE film applications.
• ITZ-458 may be used to meet the requirements of CONEG.

IP1369 by Ingenia is a UV masterbatch. It contains an optimized blend of high-performance stabilization additives in an LLDPE carrier resin. It is effective at low concentrations to offer superior chemical resistance. It enhances the performance of agricultural films during outdoor exposure, even when exposed to aggressive agrochemicals such as pesticides, insecticides and soil disinfectants.

• It is suitable for blown- and cast film, sheet extrusion and film coating.
• It is free of animal-based ingredients.
• IP1369 is designed for LDPE, LLDPE and HDPE film applications.
• It is recommended for agricultural applications such as greenhouse film, mulch film, tunnels, geotextiles, silage wrap, shade cloth, bale wrap and shrouds.
• It may be used to meet the requirements of Title 21 of the U.S. FDA and CONEG.

IP136901 by Ingenia is a UV masterbatch. It contains an optimized blend of high-performance stabilization additives in an LLDPE carrier resin. It enhances the performance of agricultural films during outdoor exposure, even when exposed to aggressive agrochemicals such as pesticides, insecticides and soil disinfectants. It is effective at low concentrations to offer superior chemical resistance.

• It is designed for LDPE, LLDPE and HDPE film applications.
• It is suitable for blown- and cast film, sheet extrusion and film coating.
• It is free of animal-based ingredients.
• IP136901 is recommended for agricultural applications such as greenhouse film, mulch film, tunnels, geotextiles, silage wrap, shade cloth, bale wrap and shrouds.
• It may be used to meet the requirements of CONEG.

Light Stabilizer 119 distributed by DKSH is a high molecular weight, non-polymeric hindered amine light stabilizer. It offers excellent thermal stability, low volatility, migration- and high-temperature resistance.

• It can perform well even in a weakly acidic environment.
• It decreases the interaction with agrochemicals, fillers, pigments and other additives.
• Suitable for use in polyethylene greenhouse film applications, polypropylene fibers, PP filled with talcum powder, TPO automotive parts.
• Light Stabilizer 119 is also suitable for PE, POE, EVA, PS, ABS, EPDM, PVC, PU, PA, POM, PBT, PET and PMMA applications.
• It is available in Canada.

StanoStat A20W by Keeling & Walker is antimony-doped tin oxide, conductive filler. This aqueous colloidal dispersion is used for near-infrared absorbing polymer films. It provides high electrical conductivity and excellent absorption of infrared light at an excellent price to performance ratio. It is used for reheating applications in PET processing, 3D printing or powder sintering. StanoStat A20W is suitable for high end solar control films for automotive & residential applications, or in agricultural films.

Tinuvin® 111 by BASF is a synergistic mixture of a methylated high molecular weight hindered amine light stabilizer (HALS) and oligomeric Tinuvin® 622. Acts as an excellent UV stabilizer.

• Exhibits outstanding extraction resistance, low gas fading and low pigment interaction.
• Provides exceptional ancillary properties such as agricultural performance, especially mulch applications.
• Well-suited for PP fibers and applications with moderate chemical exposure.
• The recommended dosage level ofTinuvin® 111 is 0.05-1.5%.

Omya Smartfill™ 55 - AV by Omya is a natural calcium carbonate with special surface modification. Exhibits excellent compatibility with engineering polymers such as polyamides (PA) and polycarbonate (PC) and does not cause hydrolysis in biopolymer extrusion. It improves the elongation and impact strength of polyamide (PA) due to an improved isotropy.

• Provides processing benefits which includes reduced warpage and improved surface finish in glass fiber compounds.
• Offers improved polycarbonate (PC) properties compared to conventional calcium carbonate and titanium dioxide with extra opacity.
• It increases polylactic acid (PLA) ductility and can be added to PHA/PHB at higher addition rates than other calcium carbonate grades.
• Omya Smartfill™ 55 - AV is made of 100% PIR (Post Industrial Recycled) calcium carbonate according to Bureau Veritas. The recycled status of this material does not affect suitability for use in contact-sensitive applications (like Food Contact/Food packaging).

AddWorks™ PPA 122 G by Clariant is polyethylene masterbatch based on a new technology of sustainable polymer processing aids. It is designed specifically for polyolefin extrusion applications such as polyethylene blown and cast film extrusion. It is used to improve extrusion efficiency and eliminate surface defects like shark skin. It is PFAS-free formulation and compliant with global regulatory requirements, including suitability for food contact and packaging. AddWorks™ PPA 122 G offers superior film surface smoothness without affecting optical or mechanical properties. Ut is inorganic, silicone and polysiloxane materials. It is suitable for diverse markets including packaging, agriculture, and building & construction industries. It helps manufacturers comply with tightening PFAS regulations and supports recyclability under upcoming EU Packaging and Packaging Waste Regulation (PPWR). It has a shelf life of 2 years. This product is targeted for Greater China and SEAP regions (China, HK, India, Indonesia, Singapore, Malaysia, Thailand, Taiwan, Philippines, Vietnam).

Nubiperf SRD distributed by DKSH is a high dispersibility, super reddish ultramarine blue. It is a pigment with excellent outdoor durability, light and heat fastness. It is non bleeding and non migratory.

• It has low moisture content, narrow colorimetric tolerances, low sulfur, no oversized particles series mostly for plastics (including engineering polymers) where it shows excellent dimensional stability.
• It is used in electronic products.
• It is suitable for a broad range of polymers e.g. polyolefins, PS, PVC, ABS, engineering polymers, silicones and rubber.
• Nubiperf SRD is available in APAC Region (Vietnam, Thailand, Myanmar, Malaysia).

Omya Smartfill™ by Omya is a natural calcium carbonate with special surface modification. Exhibits excellent compatibility with engineering polymers such as polyamides (PA) and polycarbonate (PC) and does not cause hydrolysis in biopolymer extrusion. It improves the elongation and impact strength of polyamide (PA) due to an improved isotropy.

• Provides processing benefits which includes reduced warpage and improved surface finish in glass fiber compounds.
• Offers improved polycarbonate (PC) properties compared to conventional calcium carbonate and titanium dioxide with extra opacity.
• Omya Smartfill™ increases polylactic acid (PLA) ductility and can be added to PHA/PHB at higher addition rates than other calcium carbonate grades.