About RapidPurge

RapidPurge is a global leader in commercial-grade purging compounds, established in 1979 with headquarters in Essex, Connecticut, USA. The company pioneered the development of chemical purging agents for the plastics industry. Focused on reducing downtime, scrap, and costs, RapidPurge offers highly effective cleaning solutions for all major processing technologies. Its portfolio includes chemical purging compounds, mechanical purge compounds, concentrated purge grades, low-temperature and high-temperature formulations, as well as specialty purging solutions for polyolefins, engineering resins, PVC, PET, and food-contact or medical applications in injection molding, extrusion, and blow molding.

RE5540

RE5540 by RapidPurge is a non-ammonia, non-foaming and non-abrasive premix purging grade. Exhibits dispersion of active ingredients, low smoke or fume emission and chemical- & mechanical properties. Is thermally activated and offers softening chemistry to soften polymer structure and lower viscosity of resident resin. RE5540 is used in injection, extrusion and blow molding applications. Recommended to purge downstream equipments like hot runner tools and dies. Formulated for high viscosity/stiffness resins and/or high temperature purging up to 725°F. Meets FDA and GRAS.

Sustainable option

See the product

MP1000HT

MP1000HT by RapidPurge is a general purpose, PE based purging pre-mix grade, containing heat-activated foaming pellets. Provides purging of low/negative flow areas. Exhibits enhanced scrubbing, soft polishing, no dwell time in machine and no change in temperature or viscosity requirements. MP1000HT is used in injection, extrusion and blow molding applications. Is formulated for high viscosity/stiffness resins and high temperature purging up to 725°F.

See the product

MP1000

MP1000 by RapidPurge is a general purpose, universal PE based purging pre-mix grade, containing heat-activated foaming pellets. Provides purging of low/negative flow areas. Exhibits enhanced scrubbing, soft polishing, no dwell time in machine and no change in temperature or viscosity requirements. MP1000 is used in injection, extrusion and blow molding applications. Is formulated for 380 - 565°F.

See the product