Supplier Page
PEEKChina
OverviewProducts4Brands1Products families1

About PEEKChina

PEEKChina, founded in 2009 and headquartered in Taizhou, Zhejiang, China, is a manufacturer of high-performance polyether ether ketone (PEEK) materials. Specializing in the full industry chain from PEEK resin polymerization to extrusion of profiles (rods, sheets, tubes) and finished parts, the company serves demanding sectors including automotive, aerospace, electronics, medical, and oil & gas with a strong focus on quality, innovation, and cost-effective solutions. For the plastics industry, PEEKChina offers PEEK resins, glass fiber and carbon fiber reinforced PEEK compounds, and specialty grades. These provide exceptional heat resistance (continuous use up to 260°C), superior mechanical strength, excellent chemical and wear resistance, and outstanding dimensional stability in high-temperature injection-molded parts, bearings, seals, bushings, and structural components.

Most viewed products

ARKPEEK® MOD

ARKPEEK® MOD by PEEKChina is a high performance polyetheretherketone (PEEK) reinforced with 10% carbon fiber, 10% PTFE & 10% graphite. It offers excellent sliding, abrasion & wear resistance, high mechanical strength and high dimensional stability. It has good fluidity and high thermal decomposition temperature. <br> <ul style="padding-left: 40px;"><li>Suitable for processing by injection molding, blow molding, compression molding, extrusion molding and melt spinning. </li> <li>The long-term service temperature range of PEEK rod is -30°C to 250°C and has a short-term maximum service temperature of 310°C. </li> <li>ARKPEEK® MOD is used in electromagnetic wires for special purposes. </li></ul>
See the product

ARKPEEK® GF30

ARKPEEK® GF30 by PEEKChina is 30% glass fiber reinforced, high-performance polyetheretherketone (PEEK) grade. It exhibits increased mechanical strength, high rigidity, improved creep strength and dimensional stability. It offers high radiation- and peeling resistance. It has good fluidity and high mechanical performance and high thermal decomposition temperature. <br> <ul style="padding-left: 40px;"><li>It is suitable for processing by injection molding, blow molding, compression molding, extrusion molding and melt spinning. </li> <li> It is suitable for use in parts which are exposed to high static loads over long periods in high temperature conditions. </li> <li>ARKPEEK® GF30 is used to make electromagnetic wires for special purposes. </li></ul>
See the product

ARKPEEK® CF30

ARKPEEK® CF30 by PEEKChina is a high performance, 30% carbon fiber reinforced polyetheretherketone (PEEK) grade. It offers high rigidity, creep strength, high mechanical strength and heat conductivity. It exhibits high radiation and peeling resistance. It has good fluidity, high mechanical performance and high thermal decomposition temperature. <br> <ul style="padding-left: 40px;"><li>Suitable for processing by injection molding, blow molding, compression molding, extrusion molding and melt spinning. </li> <li>ARKPEEK® CF30 is used to make electromagnetic wires for special purposes. </li></ul>
See the product

Most Popular Brands

ARKPEEK®

by PEEKChina

4 products
See All Products

Most popular product families

Polyketone (PK)

4 products