Return to supplier page
ParsaFlex 42107 by Parsa Polymer Sharif is a UV resistant, un-filled polypropylene (PP) compounded grade. Exhibits good flow, good stiffness/ impact balance and excellent scratch resistance. It is suitable for processing by injection molding. Used in automotive interior parts and trims, especially instrument panels and consoles. Meets ISO 9001:2008 and UL 94 HB flame rating. ParsaFlex 61302 by Parsa Polymer Sharif is a highly crystalline, UV stabilized polypropylene (PP) compounded grade, reinforced with 20% mineral filler. Exhibits good stiffness/ impact balance, low odor, good flow, good scratch resistance and high resistance to stress whitening. It is suitable for processing by injection molding. Used in automotive interior parts. Meets ISO 9001:2008 and UL 94 HB flame rating. ParsaFlex 48207 by Parsa Polymer Sharif is a highly crystalline, UV stabilized and modified polypropylene (PP) compounded grade, reinforced with 20% mineral filler. Exhibits good stiffness, high impact strength at low temperatures and elevated scratch resistance. It is suitable for processing by injection molding. Used in automotive interior trims. Meets ISO 9001:2008 and UL 94 HB flame rating. ParsaFlex 48307 by Parsa Polymer Sharifis a highly crystalline, UV stabilized polypropylene (PP) compounded grade, reinforced with 20% mineral filler. Exhibits good stiffness/ impact balance, low odor, good flow, good scratch resistance and high resistance to stress whitening. ParsaFlex 48307 is suitable for processing by injection molding. Used in automotive interior parts and trims like instrument panels and
consoles. Meets ISO 9001:2008 and UL 94 HB flame rating. ParsaFlex 48107 by Parsa Polymer Sharif is a UV resistant and un-filled polypropylene (PP) compounded grade. Exhibits good flow, good stiffness/ impact balance and excellent scratch resistance. It is suitable for processing by injection molding. Used in automotive interior parts and trims like instrument panels & consoles. Meets ISO 9001:2008 and UL 94 HB flame rating. ParsaFlex 66405 by Parsa Polymer Sharif is an un-filled, UV stabilized polypropylene (PP) compounded grade. Exhibits good stiffness/ impact balance and good flow. It is suitable for processing by injection molding. Used in automotive interior parts. Meets ISO 9001:2008 and UL 94 HB flame rating. ParsaFlex 45307 by Parsa Polymer Sharif is a low odor, UV stabilized polypropylene (PP) compounded grade, reinforced with 25% mineral filler. Exhibits ease of processing, good stiffness/ impact balance and good scratch resistance. It is suitable for processing by injection molding. Used in automotive interior parts like instrument panels and consoles. Meets ISO 9001:2008 and UL 94 HB flame rating. ParsaFlex 46307 by Parsa Polymer Sharif is a low odor, UV stabilized polypropylene (PP) copolymer grade, reinforced with 25% mineral filler. Exhibits ease of processing, good stiffness/ impact balance and good scratch resistance. It is suitable for processing by injection molding. Used in automotive interior parts like instrument panels, trims and consoles. Meets ISO 9001:2008 and UL 94 HB flame rating. ParsaFlex 31510 by Parsa Polymer Sharif is a UV stabilized, un-filled, impact modified and rubber toughened polypropylene (PP) grade. It exhibits high melt-flow rate. ParsaFlex 31510 is suitable for processing by injection molding and designed for large articles. It is used in exterior car trims and bumpers. It meets ISO 9001:2008 and UL 94 HB flame rating. ParsaFlex 31512 by Parsa Polymer Sharif is a UV stabilized, impact modified, un-filled and rubber toughened polypropylene (PP) grade. It exhibits high melt-flow rate and paintability. It is suitable for processing by injection molding and designed for large articles. ParsaFlex 31512 is used in exterior car trims and bumpers. It meets ISO 9001:2008 and UL 94 HB flame rating.
ParsaFlex
Plastics and elastomers supplied by Parsa Polymer Sharif