Return to supplier page
GRAFTABOND™ UHP-SAN 00055 PDIM by Graft Polymer is an ultra-high molecular weight polyethylene, grafted with styrene acrylonitrile. It provides improved impact strength to the base material and excellent compatibility with polymers, containing nitrile or amide groups such as SAN & ABS. GRAFTABOND™ UHP-SAN 00055 PDIM is designed for processing by extrusion and compounding. It has shelf life of 2 years from the date of delivery. GRAFTABOND™ HD-SAN 02031 C by Graft Polymer is a high density polyethylene (HDPE) grafted with styrene acrylonitrile. It provides enhanced impact strength to the base material and maintains compatibility with polymers that contain nitrile and amide groups. It can increase mechanical properties of PE/SAN and PE/ABS blends. GRAFTABOND™ HD-SAN 02031 C can be processed using extrusion and compounding. Its shelf life is 2 years. GRAFTABOND™ EV-GMA 15025 TL by Graft Polymer is an ethylene vinyl acetate copolymer grafted with glycidyl methacrylate. It provides excellent adhesion properties, flexibility, softness and polarity to the material. GRAFTABOND™ EV-GMA 15025 TL can be processed by coextrusion (tie layer) and injection overmolding. It has shelf life of 2 years from the delivery date. GRAFTABOND™ SB-MAH 00220 IM by Graft Polymer is a copolymer of styrene and butadiene, grafted with high maleic anhydride content. It offers enhanced stiffness and toughness. It also maintains excellent compatibility with polar & non-polar polymers, fibers and fillers. GRAFTABOND™ SB-MAH 00220 IM is designed for processing using compounding and extrusion. It has shelf life of 2 years. GRAFTABOND™ LL-GMA 00330 C by Graft Polymer is a linear low density polyethylene (LLDPE) grafted with glycidyl methacrylate. It is used as compatibilizer for polyethylene blends with other polymers. It improves mechanical properties such as stiffness, tensile & flexural properties and impact strength. It offers good flow. GRAFTABOND™ LL-GMA 00330 C can be processed using extrusion and compounding. It can be stored at 35°C temperature with more than 80% relative humidity. GRAFTABOND™ SEBS-GMA 02520 IM by Graft Polymer is a styrene ethylene butylene styrene terpolymer grafted with glycidyl methacrylate. It offers excellent compatibility to polyolefin and polyester blends. It provides improved flexural properties, excellent notched & unnotched izod and charpy impact strength. It offers good toughness and increased impact strength. GRAFTABOND™ SEBS-GMA 02520 IM can be processed using extrusion, injection overmolding and compounding. It is recommended for golf balls and cable compounds. GRAFTABOND™ UHHD-MAH 00020 IM by Graft Polymer is an alloy of high density polyethylene (HDPE) and ultra-high molecular weight polyethylene (UHMWPE) grafted with maleic anhydride. It is an excellent compatibilizer for polyethylene blends and an excellent toughening agent, due to the UHMWPE. GRAFTABOND™ UHHD-MAH 00020 IM can be processed using extrusion and compounding. GRAFTABOND™ LD-MAH 11530 CA by Graft Polymer is a highly functionalized polyethylene with maleic anhydride. It provides improved mechanical properties such as stiffness, tensile & flexural properties and impact strength. It can reduce water absorption in natural fiber filled composites. It is suitable as coupling agent for polyethylene compounds with glass, wood and other natural fibers. GRAFTABOND™ LD-MAH 11530 CA can be processed using compounding and extrusion. GRAFTABOND™ LD-MAH 00325 P218W is a low density polyethylene grafted with maleic anhydride by Graft Polymer. It provides improved mechanical properties such as stiffness, tensile & flexural properties and impact strength. It is suitable as compatiblizer for LDPE, polyolefin and polyamide blends. GRAFTABOND™ LD-MAH 00325 P218W can be processed using compounding and extrusion. GRAFTABOND™ PPH-MAH 70025 CA by Graft Polymer is a high performance maleic anhydride functioned homo-polypropylene. It functions as a coupling agent between reinforcing materials such as glass fibers, natural & inorganic fillers and polypropylene. It can increase adhesion properties of polypropylene to metal surfaces. It offers easy processing of glass reinforced compounds due to its high flow properties. It provides enhanced tensile & flexural properties, excellent notched & unnotched izod and charpy impact strength. It can improve performance and cost. GRAFTABOND™ PPH-MAH 70025 CA is designed for processing using extrusion and compounding.
GRAFTABOND™
Plastics and elastomers supplied by Graft Polymer