Futerro® PLA Fiber Melt Spinning by Futerro is a thermoplastic fiber-grade resin derived from annually renewable resources. Available in pellet form, it is designed for extrusion into mechanically drawn staple fibers or continuous filament, using conventional fiber spinning and drawing equipment. Well suited for fiber processes where lower fiber shrinkage is desired: partially orientated yarn (POY), fully drawn yarn (FDY), staple fibers, and continuous filament. Futerro® PLA Fiber Melt Spinning can be converted into a broad range of fiber products.
Polylactic acid. It is derived from annually renewable resources
and is specifically designed for injection molding. It is easily processed on conventional injection equipment. The material is stable in the molten state, provided that the drying procedures are followed. Recommended for applications where the requirements are clarity with heat deflection temperatures lower than 55ºC.
Polylactic acid. It is a clear extrusion sheet grade and is easily processed on conventional extrusion as well as thermoforming equipment. The material is stable in the molten state, provided that the drying procedures are followed. It is derived from annually renewable resources and is specifically designed for extrusion & thermoforming applications as, dairy containers, food service ware, transparent food containers, blister packaging, cold drink cups, candy twist wrap, salad and vegetable bags, window envelope film, lidding film, label film, injection stretch blow molded, or ISBM bottles for 1:2 stage operations. Ideal for applications such as, fresh dairy, edible oils, fresh water.
