Return to supplier page
NILAMID® A3 AL40 by Celanese is an electrically dissipative polyamide 66 (PA 66) grade, filled with 40% aluminium. Designed for injection molding process. NILAMID® A3 AL40 is used for manufacturing of bicycle brake handle, bushings and machinery parts. NILAMID® A3 HHR GF30 by Celanese is a polyamide 66 (PA66) grade reinforced with 30% glass fiber. Shows increased heat and hydrolysis stabilization (contact with engine lubricants). Is suitable for processing by injection molding. NILAMID® A3 HHR GF30 is used in car handle, air intake manifold and snowshoes. NILAMID® B3 HH K30 by Celanese is a high heat stabilized polyamide6 (PA6) grade reinforced with 30% mineral fiber. Is suitable for processing by injection molding. NILAMID® B3 HH K30 is used in car handle, air intake manifold and snowshoes. NILAMID® B3 D by Celanese is a dry impact-resistant polyamide6 (PA6) grade. Possesses easy flow and is suitable for processing by injection molding. NILAMID® B3 D is used in car handle, air intake manifold and snowshoes. NILAMID® A3 H CF20 by Celanese is a polyamide 66 (PA66) grade reinforced with 20% carbon fiber. Shows increased heat stabilization and high mechanical performance. Is suitable for processing by injection molding. Applications of NILAMID® A3 H CF20 include bicycle brake handle, bushings and machinery parts. NILAMID® B3 W M30 by Celanese is a heat stabilized polyamide6 (PA6) grade reinforced with 30% mineral fiber. Is suitable for processing by injection molding. NILAMID® B3 W M30 is used in car handle, air intake manifold and snowshoes. NILAMID® A3 GF30 TF20 by Celanese is a PTFE lubricated polyamide 66 (PA66) grade reinforced with 30% glass fiber. Is suitable for processing by injection molding. Applications of NILAMID® A3 GF30 TF20 include bicycle brake handle, bushings and machinery parts. NILAMID® A3 H by Celanese is an unfilled polyamide66 (PA66) grade. Possesses standard viscosity and shows increased heat stabilization. NILAMID® A3 H is used in car handle, air intake manifold and snowshoes. NILAMID® A3 J20 by Celanese is an unfilled polyamide 66 (PA66) grade. Possesses good flexibility at low temperature and shows very high impact resistant. Is suitable for processing by injection molding. NILAMID® A3 J20 is used in car handle, air intake manifold and snowshoes. NILAMID® B3 HH GB50 by Celanese is a high heat stabilized polyamide6 (PA6) grade reinforced with 50% glass bead. Is suitable for processing by injection molding. NILAMID® B3 HH GB50 is used in car handle, air intake manifold and snowshoes.
NILAMID®
Plastics and elastomers supplied by Celanese