Return to supplier page
GUR® UHMW-PE 402M13 by Celanese is an ultra-high molecular weight linear polyethylene grade. It offers superior pin puncture strength and balanced processability for 5μm separators in electric vehicles to enhance battery safety and performance for next-generation lithium-ion battery separators (LiBs) technology. GUR® UHMW-PE 402M13 is recommended for automotive applications. GUR® 4152 by Celanese is a self-lubricating, unfilled, linear ultra-high molecular weight polyethylene (UHMWPE) grade. Exhibits high viscosity, superior abrasion resistance and impact strength, low coefficient of friction and non-stick surfaces after processing. GUR® 4152 is normally processed by compression & transfer molding and ram extrusion. Complies with UL 94 HB Flame Rating. GUR® 4120 by Celanese is a low emission, unfilled, self-lubricating, linear ultra-high molecular weight polyethylene (UHMWPE) grade. Exhibits superior abrasion resistance, high impact strength, low coefficient of friction and non-stick surfaces after processing. It provides heat resistant and hydrolysis resistant.<br>
<ul style="padding-left: 40px;"><li>It is suitable for processing by injection molding.</li>
<li>GUR® 4120 is designed for compression molding, ram extrusion and free sintering of porous parts.</li>
<li>Complies with UL 94 HB Flame Rating.</li></ul> GUR® 4150 by Celanese is an unfilled, self-lubricating, linear ultra-high molecular weight polyethylene (UHMWPE) grade of approximately 8.7 MM g/mol calculated using Margolies equation. It provides heat resistance, high flow and hydrolysis resistance.<br>
<ul style="padding-left: 40px;"><li>Exhibits superior abrasion resistance and impact strength, low coefficient of friction and non-stick surfaces after processing.</li>
<li>GUR® 4150 is suitable for processing by concentrate blend down and injection molding.</li>
<li>Complies with UL 94 HB Flame Rating.</li></ul> GUR® GHR 8110 by Celanese is an unfilled, high molecular weight (HMW) polyethylene grade. It is suitable for processing by transfer and compression molding. GUR® 2105 by Celanese is a chemical resistant, low bulk density, high molecular weight polyethylene (HMW-PE) powder grade. Suitable for processing by extrusion. It is designed for carbon block applications. Complies with FDA 21 CFR. GUR® 4111 by Celanese is a high molecular weight polyethylene (HMW-PE) powder grade. Suitable for processing by fiber spinning and gel extrusion. Recommended application is in battery seperators. GUR® 4056-3 by Celanese is a fine particle, hydrophilic ultra-high molecular weight polyethylene (UHMW-PE) powder grade. It contains low wear and low friction additives and offers chemical resistance. Used for additive in thermoplastics and rubbers. Complies with FDA 21 CFR. GUR® HOSTALLOY™ 731 by Celanese is a melt processable high molecular weigth polyethylene (HMWPE) grade. It is hydrophilic in nature. It offers increased electrical conductivity, static dissipation, heat stabilization and hydrolysis resistance. It is suitable for processing by injection molding. Designed for thermoplastic and rubbers applications. GUR® 4550 by Celanese is an ultra-high molecular weight polyethylene (UHMW-PE) powder grade. It contains low wear and low friction additives and offers chemical resistance. It is suitable for processing by compression molding. Complies with FDA 21 CFR.
GUR®
Plastics and elastomers supplied by Celanese
57 Products match your search
GUR® UHMW-PE 402M13
by Celanese
GUR® 4152
by Celanese
GUR® 4120
by Celanese
GUR® 4150
by Celanese
GUR® GHR 8110
by Celanese
GUR® 2105
by Celanese
- Sustainable option
GUR® 4111
by Celanese
GUR® 4056-3
by Celanese
- Sustainable option
GUR® HOSTALLOY™ 731
by Celanese
GUR® 4550
by Celanese
- Sustainable option