Supplier Page
BASF
OverviewProducts709Brands28Products families14News77

Ultramid® (Plastics and elastomers)

Supplied by BASF
Ultramid® grades by BASF are a range of polyamides (PA6, PA66, and various co-polyamides PA66/6) and semi-aromatic polyamides used for molding. Used for automotive, electronics, household, photovoltaics, construction and installation, furniture, and mechanical engineering.

Key benefits of Ultramid® brand include:

  • High strength and rigidity
  • Good thermal stability
  • Chemical resistance
  • Dimensional stability
  • Available in different molecular weights and viscosities

277 Products match your search

Ultramid® A3XZC3 ESD BK23187

by BASF

Ultramid® A3XZC3 ESD BK23187 by BASF is an impact-modified, carbon fiber reinforced polyamide 66 grade. It is high-performance plastic for rugged self-contained breathing apparatus. <br> <ul style="padding-left: 40px;"><li>It is an injection molding grade with reduced surface resistivity, very good electrostatic properties and high mechanical stability. </li><li>Ultramid® A3XZC3 ESD BK23187 offers flame retardance based on red phosphorus for components requiring enhanced toughness and special requirements on electrical properties.</li><li> A specific component concept was developed for the M1 breathing system to address the requirements of firefighting operations.</li></ul>
  • Recently launched
See the product

Ultramid® A3U32

by BASF

Ultramid® A3U32 by BASF is a polyamide 66 grade. It features halogen-free flame retardancy and high design freedom, supporting standards-compliant electronic and electrical components. <br><ul style="padding-left: 40px;"><li> It helps minimize the likelihood of fire ignition, slow flame spread in the event of a fire, and limit the emission of smoke and toxic gases. </li><li> Ultramid® A3U32 meets the EN 45545 railway standard. It is recommended for railway applications. </li></ul>
  • Recently launched
See the product

Ultramid® A3WG6

by BASF

Ultramid® A3WG6 by BASF is a polyamide 66 reinforced with 30% glass fiber. It provides good toughness at low temperatures, hardness, high rigidity, high mechanical strength, stiffness, thermal stability, very good impact strength and good processability. This grade exhibits outstanding resistance to chemicals, hot lubricants and hot water, fuels, hydraulic fluids and coolants, refrigerants, dyes, paints, cleaners, degreasing agents, aliphatic and aromatic hydrocarbons and many other solvents. It possesses good elastic properties, high dimensional stability, high creep strength and excellent sliding friction properties. It is resistant to heat aging, corrosion, to aqueous solutions of salts and alkalis and to stress-crack formation compared to many amorphous plastics. Ultramid® A3WG6 by BASF is processed by injection molding. It is used for machinery components and housings such as lamp socket housings, cooling fans, insulating profile for aluminum window frames, and different automotive powertrain parts.
See the product

Ultramid® A3K

by BASF

Ultramid® A3K by BASF is an unreinforced, easy flowing, polyamide 66 (PA66) grade. It displays fast processing properties. It is the material with the greatest hardness, rigidity, abrasion resistance and thermostability. It is processed by injection molding. Ultramid® A3K by BASF is suitable for electrical household appliances. It can also be used in terminal blocks, connectors, photovoltaics and automotive construction.
See the product

Ultramid® A3HG7

by BASF

Ultramid® A3HG7 by BASF is a polyamide 66 reinforced with 35% glass fiber. It provides good toughness at low temperatures, hardness, high rigidity, high mechanical strength, stiffness, thermal stability, very good impact strength and good processability. This grade exhibits outstanding resistance to chemicals, hot lubricants and hot water, fuels, hydraulic fluids and coolants, refrigerants, dyes, paints, cleaners, degreasing agents, aliphatic and aromatic hydrocarbons and many other solvents. It is resistant to corrosion, to aqueous solutions of salts and alkalis and to stress-crack formation compared to many amorphous plastics. It possesses good elastic & dielectric properties, high heat-aging resistance, high dimensional stability, high creep strength and excellent sliding friction properties. Ultramid® A3HG7 by BASF is processed by injection molding. It is used for gear-wheels, solenoid valve housings, cable attachments, automobile manifolds and cylinder head covers as well as for electrical insulating parts.
See the product

Ultramid® BMB

by BASF

Ultramid® BMB by BASF is a virgin-quality polyamide derived from renewable raw material. It reduces fossil resource consumption and product carbon footprint without compromising on quality and performance. Certified mass balance according to REDcert.
  • Recently launched
See the product

Ultramid® A3HG6 HR

by BASF

Ultramid® A3HG6 HR by BASF is a polyamide 66 reinforced with 30% glass fiber. It possesses good elastic properties, high dimensional stability, high creep strength and excellent sliding friction properties. This grade provides good toughness at low temperatures, hardness, high rigidity, high mechanical strength, stiffness, thermal stability, very good impact strength and good processability. This grade exhibits outstanding resistance to chemicals, hot lubricants & hot water, fuels, hydraulic fluids and coolants, refrigerants, dyes, paints, cleaners, degreasing agents, aliphatic and aromatic hydrocarbons and many other solvents. It is resistant to hydrolysis, corrosion, to aqueous solutions of salts and alkalis and to stress-crack formation compared to many amorphous plastics. Ultramid® A3HG6 HR by BASF is processed by injection molding. It is used for applications in automotive cooling circuit.
See the product

Ultramid® 8270 HS

by BASF

Ultramid® 8270 HS by BASF is a heat stabilized, thermally modified PA6 grade. Possesses good elastic properties, excellent melt strength, high melt viscosity, high dimensional stability, high creep strength and excellent sliding friction properties. Provides good toughness at low temperatures, high rigidity, hardness, high mechanical strength, stiffness, thermal stability, high impact resistance, good processability, good damping characteristics and high shock resistance even in dry state and at low temperatures. Exhibits excellent permeability and outstanding resistance to chemicals, lubricants, fuels, hydraulic fluids and coolants, refrigerants, dyes, paints, cleaners, oils, aliphatic and aromatic hydrocarbons and many other solvents. Is resistant to corrosion, to aqueous solutions of salts and alkalis and to stress-crack formation compared to many amorphous plastics. Processed by blow molding and profile extrusion. It is recommended for industrial containers, small gasoline tanks and automotive under hood reservoirs. Ultramid® 8270 HS complies with RohS directive 2011/65/EC and WEEE directive 2002/96/EC.
See the product

Ultramid® H33 L

by BASF

Ultramid® H33 L by BASF is a thermoplastic polyamide (PI) with a high water permeability. It has high strength and hydrophilic properties that allows subsequent drying directly in the casing. Ultramid® H33 L is used in artificial casings in which sausages can be smoked and then dried.
  • Recently launched
See the product

Ultramid® Endure D3G7 BK20560

by BASF

Ultramid® Endure D3G7 BK20560 by BASF is a polyamide 66 grade reinforced with glass fiber. Offers long-term heat aging resistance up to 220ºC, excellent knit line and welding strength and superior flow over standard PA 66 grades. Possesses good elastic properties, dimensional stability, low tendency to creep and excellent sliding friction properties. Provides good toughness at low temperatures, high rigidity, high mechanical strength, stiffness, thermal stability, very good impact strength, good appearance and excellent processability. Exhibits outstanding resistance to chemicals, hot lubricants, hot water, fuels, hydraulic fluids and coolants, refrigerants, dyes, paints, cleaners, degreasing agents, aliphatic and aromatic hydrocarbons and many other solvents. Is resistant to corrosion, to aqueous solutions of salts and alkalis and to stress-crack formation compared to many amorphous plastics. Ultramid® Endure D3G7 BK20560 by BASF can be processed by extrusion and injection molding. It is an alternative to metal and suitable for all automotive parts exposed to higher thermal continuous use over a prolonged period of time. Applications include parts of the charge air duct such as intercooler end caps, resonators, intake manifolds, throttle valves, exhaust components or components near the exhaust gas ducts and turbo charger.
See the product
Showper page

Most Popular Brands

Ultramid®

by BASF

277 products
See All Products

Elastollan®

by BASF

114 products
See All Products

Ultradur®

by BASF

109 products
See All Products

Ultraform®

by BASF

50 products
See All Products