Bio-based
326 products found
ForTii® Eco E11
by Envalior
ForTii® Eco E11 by Envalior is a halogen- and red phosphorous-free, chemical resistant, 30% glass reinforced, PPA (PA4T) grade. It offers an excellent balance in flow, toughness and stiffness with superior processing performance. It exhibits improved toughness, high electrical RTI rating of 150°C at 0.75 mm and has CTI 600V. It is eco-friendly in nature due to its partly bio-based content. ForTii® Eco E11 is suitable for processing by SMT and injection molding. It is a certified V-0 at 0.15mm. It is used in audio jack-, DDR DIMM- and reflow connectors.
- Sustainable option
- Support available
- Original documents
LNP™ ELCRES™ FST2732E
by SABIC
LNP™ ELCRES™ FST2732E by SABIC is a PFAS-free, UV-stabilized polycarbonate (PC) copolymer resin reinforced with glass fiber & minerals. It is a non-chlorinated, non-brominated, flame retardant grade. It is also available in bio-based version.
- Offers good processability, low smoke and toxicity.
- Suitable for processing by sheet extrusion and thermoforming.
- LNP™ ELCRES™ FST2732E is recommended for train interior applications.
- It complies with EN 45545 R6–HL2.
- Sustainable option
- Support available
- Original documents
LNP™ LUBRICOMP™ Compound DCI06APW
by SABIC
LNP™ LUBRICOMP™ Compound DCI06APW by SABIC is a biocompatible (ISO10993), wear resistant, PFAS-free compound based on polycarbonate (PC) resin that contains 30% carbon fiber and silicone. It is electrically conductive grade that offers high flow and stiffness & strength. It can be processed by injection molding. LNP™ LUBRICOMP™ Compound DCI06APW is recommended for pharmaceutical- & industrial packaging, drug delivery, surgical devices, general healthcare and patient testing.
- Sustainable option
- Support available
- Original documents
Arnitel® Eco L400
by Envalior
Arnitel® Eco L400 by Envalior is a high performance thermoplastic copolyester (TPC) grade, containing 52% renewable content. It is a non-reinforced and non-flame retardant compound. Shows resistance to stain and scratch. Possesses a unique combination of flexibility, high temperature resistance and strength with excellent processing characteristics. Exhibits good aesthetics, reduced environmental impact and system cost. Designed for processing by injection molding. Arnitel® Eco L400 is used in smokable sausage casings. Other possible applications include automotive, electrical and electronics.
- Sustainable option
- Support available
- Original documents
UDea™ EcoPaXX® Q20HG60
by Envalior
UDea™ EcoPaXX® Q20HG60 by Envalior is a heat-stabilized, bio-based, polyamide 4-10 (PA 4-10) filled with 60% continuous glass fiber. This uni-directional tape is processed by lamination, thermoforming, and winding.
- Sustainable option
- Support available
- Original documents
Stanyl® HGR3-W (P1120D)
by Envalior
Stanyl® HGR3-W (P1120D) by Envalior is a heat-stabilized, wear and friction-modified, high-performance polyamide 46 grade. It is a bio-based, mass-balanced grade with good chemical resistance. Designed for automotive OEM under-the-hood applications. Stanyl® HGR3-W (P1120D) is suitable for processing by extrusion and injection molding.
- Sustainable option
- Support available
- Original documents
ForTii® Ace MX54B
by Envalior
ForTii® Ace MX54B by Envalior is a bio-based, heat-stabilized polypthalamide (PPA) reinforced with 60% glass fiber. It is PFAS and PFOA-free to ensure regulatory compliance and protect the environment. It shows good toughness at low temperatures and chemical resistance. It is designed to have dimensional stability close to that of aluminum. It offers high mechanical performance over a broad temperature range. It is suitable for processing by injection molding. ForTii® Ace MX54B is used in automotive timing drive systems, body and structural parts. Potential applications include engine mount/bracket, transmission parts, structural oil pan, timing chain cover, actuator and EPS housing.
- Sustainable option
- Support available
- Original documents
Stanyl® TS200F6
by Envalior
Stanyl® TS200F6 by Envalior is a high-performance polyamide (PA 4-6) grade reinforced with 30% glass fiber. It provides high mechanical properties, strength, design stiffness, wear & friction and process flow qualities. It is an electro-friendly high heat polyamide that offers excellent creep-, heat-, chemical- and fatigue resistance especially at high temperatures in combination with cycle-time advantages and excellent flow. It is also available as a bio-based mass-balanced alternative. It is suitable for processing by injection molding. Stanyl® TS200F6 is used in automotive, gears, electrical & electronics, outdoor power equipment, reflow- and audio jack connectors.
- Sustainable option
- Support available
- Original documents
