Rubbers for Plastic Parts

Viton™ A-331C by Chemours is an intermediate viscosity, fluoroelastomer dipolymer grade consisting of hexafluoropropylene and vinylidene fluoride plus cure chemicals. It offers good mold flow, excellent storage stability, improved demolding hot tear resistance, good mold release with less mold fouling and good compression set resistance. It is fully precompounded with reduced curative level and incorporated process aid. It is suitable for processing by transfer molding, injection molding, compression molding and extrusion. Viton™ A-331C is suitable for O-rings, seals, gaskets, profile and extruded O-ring cord & hose applications.

OPPANOL® N PLUS by BASF is a high-performance binder based on polyisobutene (PIB) technology. It provides high elasticity and extensibility, helping to compensate for mechanical stress during charging and discharging, thereby contributing to battery lifetime and stability.

• It is suitable for next-generation batteries, particularly solid-state batteries (SSB).
• It can be used in the cathode, anode, or electrolyte, where it reliably holds individual components together while keeping them effectively separated.
• OPPANOL® N PLUS supports the production of high-performance and reliable batteries for electric vehicles and e-mobility applications.

NORDEL™ IP 4770P EPDM by Dow is a high molecular weight, semi-crystalline ethylene-propylene-diene terpolymer (EPDM). It offers fast cure rates and high states of cure with standard sulfur cure systems. It exhibits high green strength and high extensibility.

• It provides great physical performance and supports the global transition to a low-carbon economy.
• It is suitable for processing by profile extrusion.
• It is used in applications such as automotive and general purpose hoses and tubing, weatherstrips, low voltage wire and cable jacketing and plastics modification.
• It can also be used in contact with all foods except water in oil emulsions, high or low fat, and low moisture fats and oil.
• It is free of BSE/TSE, palm oil, mineral oil and GMO.
• NORDEL™ IP 4770P EPDM is Halal, Kosher, complies with TSCA, FDA 21CFR 177.1520, FDA 21 CFR 177.2600, FDA 21 CFR 175.105, FDA 21 CFR 177.1210, (EU) 10/2011<, GB 4806.1-2016, GB 4806.11-2023, GB 4806.7-2023, GB 9685-2016, MERCOSUR, ANVISA, EU Directive 2011/65/EU (RoHS) and conforms to EU 94/62/EC, CONEG.

Viton™ A-361C by Chemours is an intermediate viscosity, fluoroelastomer dipolymer grade consisting of hexafluoropropylene and vinylidene fluoride plus cure chemicals and metal adhesion promoter. It is fully precompounded with reduced curative level and improved processing. It offers excellent storage stability, good mold flow, improved demolding hot tear resistance, good mold release with less mold fouling, good fluid resistance and good heat resistance. Also offers good metal bonding with standard industrial primers. It is processed by transfer molding, injection molding and compression molding. Viton™ A-361C is suitable for O-rings, gaskets, valve stem and crankshaft seal applications.

NORDEL™ IP 4785HM EPDM by Dow is a high-viscosity, semi-crystalline, ethylene propylene diene monomer (EPDM) grade. It offers ease of processing, fast cure rates, and high states of cure with standard sulfur cure systems.

• It is designed for molded and extruded applications that require high viscosities, high green strength, and high filler capacity.
• Additionally, it can also be peroxide cured.
• It exhibits medium diene levels with low gel content and supports the global transition to a low-carbon economy.
• NORDEL™ IP 4785HM EPDM is used in automotive weather stripping, and hose and tubing.
• It complies with FDA 21 CFR 177.2600, 21 CFR 177.1520, 21 CFR 175.105 and 21 CFR 177.1210.

Viton™ A-200 by Chemours is a low viscosity, fluoroelastomer dipolymer grade consisting of hexafluoropropylene and vinylidene fluoride. It is designed for use with the clean molding bisphenol curative, Viton™ Curative No. 50. It offers improved mold flow, excellent storage stability, less mold fouling, better mold release and improved compression set resistance. It is suitable for processing by transfer molding, injection molding and extrusion. Viton™ A-200 is suitable for O-rings, valve stem seals & shaft seals, parts with complicated shapes, fuel hose, tubing and solution coating applications such as fabric & tanks or chemical containers.

Viton™ A-401C by Chemours is fluoroelastomer dipolymer grade consisting of hexafluoropropylene and vinylidene fluoride plus cure chemicals. It offers increased mold flow, excellent storage stability, less mold fouling, good mold release and increased cure rate.

• Also offers good chemical & heat resistance, good processability and good compression set resistance.
• It is fully precompounded with O-ring curative level.
• It is suitable for processing by compression molding and extrusion.
• Viton™ A-401C is suitable for cord, gaskets, seals, and profile applications. It can be formulated to meet fluoroelastomer specifications Mil-R-83248B, AMS 7276D, and AMS 7259A.

Viton™ GFLT-600S A by Chemours is a peroxide cured, 67% fluorine, low temperature fluoroelastomer with a gum polymer. It is based on new advanced polymer architecture (APA) and FWRD technologies. It is a terpolymer of perfluoromethylvinyl ether, vinylidene fluoride, tetrafluoroethylene, and a proprietary cure site monomer. It possesses excellent fluid resistance to aromatic hydrocarbons and alcohols, including methanol, ethanol, biodiesel, oils, hot water and steam, as well acids.

• It is compatible with latest EV fluids, (oils and coolants, transmission, and thermal fluids) as well as cooling systems used in hydrogen applications.
• It is ideal for low temperature applications.
• It provides excellent physical properties with high elongation, both original and aged in standard compounds and in formulations with no or low filler, even after aging.
• It offers excellent storage stability and outstanding compression set resistance with either low or no post-cure.
• It is ideal for blending with Viton™ GFLT-200S A to reach intermediate viscosity ranges for injection molding as well as with other FWRD APA grades (e.g., GBL-S A, GLT-S A).
• Viton™ GFLT-600S A is manufactured without fluorinated surfactant.

Viton™ A-100 by Chemours is an ultralow-viscosity, dipolymer of hexafluoropropylene and vinylidene fluoride. It is especially designed for use with Viton™ Curative No.50.

• It offers excellent storage stability & mold release and good compression set resistance.
• It is suitable for processing by transfer molding, injection molding and extrusion.
• It can be blended with other Viton™ types to enhance processibility & rheology and improve flow.
• It is used for molding of complex shapes, such as gaskets and for solution coating applications such as fabric & tanks or chemical containers.

Viton™ GLT-600S A by Chemours is a 64% fluorine, peroxide-cured, low temperature fluoroelastomer with a gum polymer. It is based on advanced polymer architecture (APA) and FWRD technology. It is a terpolymer of perfluoromethylvinyl ether, vinylidene fluoride and tetrafluoroethylene and a proprietary cure site monomer. It is manufactured without fluorinated surfactant.

• It exhibits excellent fluid resistance to aromatic hydrocarbons and alcohols, including methanol and ethanol, biodiesel, oils, hot water and steam, as well acids.
• It is compatible with latest EV fluids, (oils and coolants, transmission, and thermal fluids) as well as cooling systems used in hydrogen applications.
• It offers excellent physical properties with high elongation, both original and aged in standard compounds and in formulations with no or low filler, even after aging.
• It is ideal for low temperature applications.
• It provides excellent storage stability and outstanding compression set resistance with either low or no post-cure.
• It has great color stability in mineral filled compound formulations.
• Viton™ GLT-600S A is suitable for blending with Viton™ GLT-200S A to reach intermediate viscosity ranges for injection molding as well as with other FWRD APA grades (e.g., GBL-S A, GFLT-S A).