VECTOR® 4114A by TSRC Corporation is a low modulus, styrene isoprene styrene and styrene isoprene (SIS/SI) block copolymer blend of linear SIS triblock and SI diblock (42%) copolymer containing low styrene. It is softer than VECTOR 4113A SIS/SI due to higher diblock content. Produced via anionic polymerization technology. VECTOR® 4114A is recommended for use in hot melt pressure sensitive adhesives, elastomer compounds and photopolymer plate applications.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
| Appearance | Visible After Login |
Compliance
No data available
Applications
Recommended markets
No data available
Availability
Product Status:Visible After Login
VECTOR® 4114A properties
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| 300% Modulus | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Hardness, Shore A | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Elongation | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Ash Content | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Density, Bulk | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Viscosity | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Diblock Content | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Specific Gravity | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Styrene | 0.0 Visible After Login | Visible After Login | Visible After Login |