PLEXIGLAS® Hi-Gloss NTX-8 by Roehm is an amorphous, high gloss polymethyl methacrylate (PMMA) grade. Exhibits very good weather resistance, high mechanical strength, surface hardness and abrasion resistance. Shows increased wipe resistance, flow and demolding. Provides very good polishability, less tendency to create weld lines and superior brilliance. PLEXIGLAS® Hi-Gloss NTX-8 is suitable for processing by injection molding. Complies with ISO 9001: 2008, ISO 14001: 2004, BS OHSAS 18001: 2007 and ISO/ TS 16949:2009. Used in automotive B pillar covers, mirror housings and interior decorative trim parts.
Product family:
Chemical family:
Product Type:
| CAS Number | Visible After Login |
| Bio Based content | Visible After Login |
| Color | Visible After Login |
| Appearance | Visible After Login |
Compliance
| Certifications & Compliance | Visible After Login |
Applications
Recommended markets
Applications
Conversion mode
Availability
Product Status:Visible After Login
PLEXIGLAS® Hi-Gloss NTX-8 properties
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Impact Strength, Charpy | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Modulus of Elasticity | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Nominal Strain | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strain | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Melt Volume Flow Rate (MVR) | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Deflection Temperature at 1.8 MPa (264 psi) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Vicat Softening Temperature | 0.0 Visible After Login | Visible After Login | Visible After Login |
PLEXIGLAS® Hi-Gloss NTX-8 Processing Guidelines
Injection Molding Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Mold Temperature | Visible After Login | Visible After Login | |
| Pre-Drying Temperature | Visible After Login | Visible After Login | |
| Pre-Drying Time (Desiccant-Type Drier) | Visible After Login | Visible After Login | |