PolyPlus™ PLA is a polylactic acid (PLA) grade by Polymaker, produced with the patented Jam-Free™ technology. Exhibits vibrant colors and improved heat stability. Is safe & clean and does not release hazardous odors. Is insoluble in water and soluble in chloroform, toluene and tetrahydrofuran (THF). PolyPlus™ PLA is suitable for processing by extrusion. USed in desktop FDM/FFF printers.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
Compliance
No data available
Applications
Recommended markets
Applications
Conversion mode
Availability
Product Status:Visible After Login
PolyPlus™ PLA properties
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Bending Modulus | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Impact Strength, Izod | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Modulus of Elasticity | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Elongation | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Flexural Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Softening Point | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Specific Gravity | 0.0 Visible After Login | Visible After Login | Visible After Login |
Processing properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Moisture Content | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Glass Transition Temperature (Tg) | 0.0 Visible After Login | Visible After Login | Visible After Login |
PolyPlus™ PLA Processing Guidelines
Extrusion Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Infill Content | Visible After Login | Visible After Login | |
| Number of Shells | Visible After Login | Visible After Login | |
| Printing Speed | Visible After Login | Visible After Login | |
| Printing Temperature | Visible After Login | Visible After Login | |