COPYLENE® CH350 by Phillips 66 is a controlled rheology, barefoot polypropylene homopolymer (PP, Homopolymer). Designed for injection molding applications. Recommended as a base resin for compounding and consumer products. Complies with REACH (Regulation (EC) No. 1907/2006), European Union (EU) Food Contact, No 10/2011, US Food and Drug Administration (FDA), 21 CFR 177.1520(a) (1) (i) and (c) 1.1a and European Union (EU) Directive - Packaging and Packaging Waste - 94/62/EC.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
| Appearance | Visible After Login |
Compliance
| Food Contact Approval | Visible After Login |
| Certifications & Compliance | Visible After Login |
Applications
Recommended markets
Conversion mode
Availability
Product Status:Visible After Login
COPYLENE® CH350 properties
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| 1% Secant Modulus | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Elongation at Yield | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Impact Strength, Notched Izod | 0.0 Visible After Login | Visible After Login | Visible After Login |
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Tensile Strength at Yield | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Specific Gravity | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Heat Deflection Temperature (HDT), Unannealed | 0.0 Visible After Login | Visible After Login | Visible After Login |
COPYLENE® CH350 Processing Guidelines
Injection Molding Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Adapter | Visible After Login | Visible After Login | |
| Back Pressure | Visible After Login | Visible After Login | |
| Clamp Pressure | Visible After Login | Visible After Login | |
| Cushion (dependent on shot size) | Visible After Login | Visible After Login | |
| Fill Speed, First 10% of Shot | Visible After Login | Visible After Login | |
| Fill Speed, Last 20% of Shot | Visible After Login | Visible After Login | |
| Fill Speed, Next 70% of Shot | Visible After Login | Visible After Login | |
| First or Boost Stage Injection, Pressure | Visible After Login | Visible After Login | |
| First or Boost Stage Injection, Time | Visible After Login | Visible After Login | |
| Front Zone | Visible After Login | Visible After Login | |
| Hot Runner/Manifold Temperature | Visible After Login | Visible After Login | |
| Melt Temperature | Visible After Login | Visible After Login | |
| Middle Zone | Visible After Login | Visible After Login | |
| Mold Temperature | Visible After Login | Visible After Login | |
| Nozzle | Visible After Login | Visible After Login | |
| Packing Stage Time | Visible After Login | Visible After Login | |
| Rear Zone | Visible After Login | Visible After Login | |
| Screw Speed | Visible After Login | Visible After Login | |
| Second or Hold Stage Injection, Pressure | Visible After Login | Visible After Login | |
| Second or Hold Stage Injection, Time (with a packing stage) | Visible After Login | Visible After Login | |
| Second or Hold Stage Injection, Time (without a packing stage) | Visible After Login | Visible After Login | |