Technical datasheet
ALTECH® PP-H A 2030/525 GF30 CP UV
Supplied byMOCOM Compounds- Last Updated on Jan 16, 2026
ALTECH® PP-H A 2030/525 GF30 CP UV by MOCOM Compounds is a chemically coupled polypropylene (PP) homopolymer grade reinforced with 30% glass fibers. It offers UV and heat stabilization. It is suitable for injection molding applications. ALTECH® PP-H A 2030/525 GF30 CP UV is recommended in automotives, electrical & electronic, building & construction, do-it yourself applications for housings, handles, clothing, fasteners and wheel trims.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
Compliance
No data available
Applications
Recommended markets
Applications
Conversion mode
Availability
Product Status:Visible After Login
ALTECH® PP-H A 2030/525 GF30 CP UV properties
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Elongation at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Flexural Modulus | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Flexural Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Impact Strength, Charpy | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Impact Strength, Charpy | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Impact Strength, Notched Charpy | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Impact Strength, Notched Charpy | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Modulus of Elasticity | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Linear Mold Shrinkage | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Linear Mold Shrinkage | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Deflection Temperature at 1.8 MPa (264 psi) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melting Point | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Vicat Softening Temperature | 0.0 Visible After Login | Visible After Login | Visible After Login |
ALTECH® PP-H A 2030/525 GF30 CP UV Processing Guidelines
Injection Molding Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Barrel Zone 1 Temperature | Visible After Login | Visible After Login | |
| Barrel Zone 2 Temperature | Visible After Login | Visible After Login | |
| Barrel Zone 3 Temperature | Visible After Login | Visible After Login | |
| Barrel Zone 4 Temperature | Visible After Login | Visible After Login | |
| Drying Temperature (Air Dessicant Dryer) | Visible After Login | Visible After Login | |
| Drying Time (Air Dessicant Dryer) | Visible After Login | Visible After Login | |
| Melt Temperature | Visible After Login | Visible After Login | |
| Moisture Content | Visible After Login | Visible After Login | |
| Mold Temperature | Visible After Login | Visible After Login | |
| Residence time | Visible After Login | Visible After Login | |
Injection molding Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Back Pressure | Visible After Login | Visible After Login | |
| Screw Speed | Visible After Login | Visible After Login | |