ALPERFORM® PC LD 0208-15 by MOCOM Compounds is polycarbonate (PC) with high light diffusion. It is suitable for injection molding applications.
| CAS Number | Visible After Login |
| Bio Based content | Visible After Login |
Compliance
No data available
Applications
Recommended markets
No data available
Conversion mode
Availability
Product Status:Visible After Login
ALPERFORM® PC LD 0208-15 properties
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Melt-Volume Flow Rate | 0.0 Visible After Login | Visible After Login | Visible After Login |
ALPERFORM® PC LD 0208-15 Processing Guidelines
Injection Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Pre-drying Temperature (Air Circulating Dryer) | Visible After Login | Visible After Login | |
| Pre-drying Temperature (Air Dessiccant Dryer) | Visible After Login | Visible After Login | |
| Pre-drying Time (Air Circulating Dryer) | Visible After Login | Visible After Login | |
| Pre-drying Time (Air Dessiccant Dryer) | Visible After Login | Visible After Login | |
Injection Molding Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Melt Temperature | Visible After Login | Visible After Login | |
| Mold Temperature | Visible After Login | Visible After Login | |