ALFATER XL® D40I 3EF0010 by MOCOM Compounds is a polypropylene and ethylene propylene diene monomer vulcanizate elastomer (PP/EPDM TPV) alloy. Provides good colorability, high surface quality, good chemical resistance, good hydrolysis resistance and easy flow. Exhibits good weathering-, alkali-, ozone- and hot air resistance. Offers good impact protection and shock absorbtion. It is suitable for processing by injection molding. ALFATER XL® D40I 3EF0010 is recommended for seals, handles, racks & shelves, soft touch elements, protection caps, thin walled parts, profile, cable ducts, automotive, buildings & construction, electrical, electronic, sport and leisure applications.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
| Color | Visible After Login |
Compliance
No data available
Applications
Recommended markets
Applications
Conversion mode
Availability
Product Status:Visible After Login
ALFATER XL® D40I 3EF0010 properties
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| 100% Modulus | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Compression Set | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Compression Set | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Compression Set | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Compression Set | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Elongation at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Hardness, Shore D | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tear Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Linear Mold Shrinkage, Flow | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Linear Mold Shrinkage, Transverse | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Spiral Flow | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Maximum Service Temperature, Air | 0.0 Visible After Login | Visible After Login | Visible After Login |
ALFATER XL® D40I 3EF0010 Processing Guidelines
Injection Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Pre-drying Temperature (Air Dessiccant Dryer) | Visible After Login | Visible After Login | |
| Pre-drying Time (Air Dessiccant Dryer) | Visible After Login | Visible After Login | |
Injection Molding Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Back Pressure | Visible After Login | Visible After Login | |
| Hold Pressure | Visible After Login | Visible After Login | |
| Melt Temperature | Visible After Login | Visible After Login | |
| Mold Temperature | Visible After Login | Visible After Login | |