Technical datasheet
ALCOM® WP PA66 5020 PTFESI 15042
Supplied byMOCOM Compounds- Last Updated on Jan 16, 2026
ALCOM® WP PA66 5020 PTFESI 15042 by MOCOM Compounds is a processing stabilized polyamide 66 (PA66) grade reinforced with 20% polytetrafluoroethylene (PTFE) and silicone. It shows improved sliding property, wearability, easy flow-& release (demolding). It is suitable for processing by injection molding. ALCOM® WP PA66 5020 PTFESI 15042 is used in machinery and automotives for functional components, bearings and sliding elements.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
Compliance
No data available
Applications
Recommended markets
Conversion mode
Availability
Product Status:Visible After Login
ALCOM® WP PA66 5020 PTFESI 15042 properties
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| 3.5% Flexural Stress | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Elongation at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Elongation at Yield | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Flexural Modulus | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Impact Strength, Charpy | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Impact Strength, Charpy | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Impact Strength, Notched Charpy | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Impact Strength, Notched Charpy | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Modulus | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Heat Deflection Temperature (HDT), Annealed | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melting Point | 0.0 Visible After Login | Visible After Login | Visible After Login |
ALCOM® WP PA66 5020 PTFESI 15042 Processing Guidelines
Injection Molding Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Barrel Zone 1 Temperature | Visible After Login | Visible After Login | |
| Barrel Zone 2 Temperature | Visible After Login | Visible After Login | |
| Barrel Zone 3 Temperature | Visible After Login | Visible After Login | |
| Barrel Zone 4 Temperature | Visible After Login | Visible After Login | |
| Drying Temperature (Air Dessicant Dryer) | Visible After Login | Visible After Login | |
| Drying Time (Air Dessicant Dryer) | Visible After Login | Visible After Login | |
| Mass Temperature | Visible After Login | Visible After Login | |
| Moisture Content | Visible After Login | Visible After Login | |
| Mold Temperature | Visible After Login | Visible After Login | |
| Residence Time | Visible After Login | Visible After Login | |
Injection molding Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Back Pressure | Visible After Login | Visible After Login | |
| Screw Speed | Visible After Login | Visible After Login | |