Technical datasheet
BioPBS™ FZ71 (PM/PB)
Supplied byMitsubishi Chemical Performance Polymers (MCPP)- Last Updated on Aug 6, 2025
BioPBS™ FZ71 (PM/PB) by Mitsubishi Chemical Performance Polymers (MCPP) is a bio-based polybutylene succinate (PBS) standard grade. It is derived from natural resources such as sugarcane, cassava and corn.
- It is compostable at open-air landfill site in an ambient condition (30°C), without requiring a specialized composting facility.
- It decomposes into biomass, carbon dioxide & water and is disposed of along with organic waste.
- It shows flexibility, softness with low temperature, high service temperature and good printability without pre-treatment.
- It is environment-friendly, renewable and has excellent processability & heat sealability.
- It is easy to be compounded with other bioplastics such as polylactic acid (PLA).
- BioPBS™ FZ71 (PM/PB) is suitable for processing by coating, blown film extrusion and injection molding.
- It is used for paper coatings, sealants in flexible packaging, hot beverage cups, boxes and utensils for freshly cooked food.
Product family:
Chemical family:
Product Type:
| CAS Number | Visible After Login |
| Bio Based | Visible After Login |
| Bio Based content | Visible After Login |
Compliance
| Food Contact Approval | Visible After Login |
| Certifications & Compliance | Visible After Login |
Applications
Recommended markets
Applications
Conversion mode
Availability
Product Status:Visible After Login
BioPBS™ FZ71 (PM/PB) properties
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Flexural Modulus | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Flexural Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Hardness, Rockwell R | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Impact Strength, Izod | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Elongation at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength at Yield | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Deflection Temperature at 0.46 MPa (66 psi) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melting Point | 0.0 Visible After Login | Visible After Login | Visible After Login |