THERMOLAST® R HRB9000/162 by Kraiburg is a translucent, bio-based thermoplastic elastomer (TPE). It contains renewable materials and less PCF compared to virgin compound. It is recyclable in post-consumer waste stream. It offers colorability, adhesion to PP and in-process recycling is possible.
- It is suitable for processing by injection molding.
- It provides more sustainable solutions, while maintaining the usual performance and reducing the product carbon footprint.
- It is used in grip, function and design elements, razors, soft touch surface (thumb wheels, push buttons, switches) and caps applications.
- Shelf life of THERMOLAST® R HRB9000/162 is 24 months.
Product family:
Chemical family:
Product Type:
| Bio Based | Visible After Login |
| Bio Based content | Visible After Login |
Compliance
No data available
Applications
Recommended markets
Applications
Conversion mode
Availability
Product Status:Visible After Login
Regional Availability:Visible After Login| Visible After Login| Visible After Login
THERMOLAST® R HRB9000/162 properties
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Elongation at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Hardness, Shore A | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Tear Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
THERMOLAST® R HRB9000/162 Processing Guidelines
Injection Molding Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Mold Temperature | Visible After Login | Visible After Login | |
| Pre-Drying Temperature | Visible After Login | Visible After Login | |
Injection molding Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Back Pressure | Visible After Login | Visible After Login | |
| Cylinder Temperature | Visible After Login | Visible After Login | |
| Hold Pressure | Visible After Login | Visible After Login | |
| Hot Runner Temperature | Visible After Login | Visible After Login | |
| Injection Pressure | Visible After Login | Visible After Login | |
| Injection Rate | Visible After Login | Visible After Login | |
| Pre-drying Time | Visible After Login | Visible After Login | |
| Residence Time | Visible After Login | Visible After Login | |