THERMOLAST® M TM6LFT by Kraiburg is a translucent, water-insoluble TPE (thermoplastic elastomer) grade. It is free from animal ingredients. It exhibits low friction, excellent mechanical & resealing properties and adhesion to PP (polypropylene). It is listed on DMF.
- It is an extremely soft and custom-made compound.
- It can be processed using injection molding and extrusion with short cycle time.
- It can be sterilized using EtO gas, superheated steam, y-gamma ray and ß-ray (electron beam) treatment.
- It is suitable for medical and pharmaceutical applications.
- It is also recommended for typical applications like mechanical components, seals and syringe gaskets.
- THERMOLAST® M TM6LFT complies with the REACH regulations, USP class VI, ISCC PLUS requirements and reduces product carbon footprint (PCF).
Product family:
Product Type:
| Bio Based content | Visible After Login |
| Appearance | Visible After Login |
Compliance
| Certifications & Compliance | Visible After Login |
Applications
Recommended markets
Applications
Conversion mode
Availability
Product Status:Visible After Login
Regional Availability:Visible After Login| Visible After Login| Visible After Login
THERMOLAST® M TM6LFT properties
Flammability properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Flash Point | 0.0 Visible After Login | Visible After Login | Visible After Login |
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Compression Set | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Elongation at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Hardness, Shore A | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density, Bulk | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tear Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Melting Point | 0.0 Visible After Login | Visible After Login | Visible After Login |
THERMOLAST® M TM6LFT Processing Guidelines
Extrusion Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Compression ratio | Visible After Login | Visible After Login | |
| Cylinder Temperature | Visible After Login | Visible After Login | |
| Die Land | Visible After Login | Visible After Login | |
| Die Temperature | Visible After Login | Visible After Login | |
| Drying Temperature | Visible After Login | Visible After Login | |
| Drying Time | Visible After Login | Visible After Login | |
| Extruder Head | Visible After Login | Visible After Login | |
| L/D Ratio | Visible After Login | Visible After Login | |
| Moisture Content | Visible After Login | Visible After Login | |
Injection Molding Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Back Pressure | Visible After Login | Visible After Login | |
| Cylinder Temperature | Visible After Login | Visible After Login | |
| Drying Temperature | Visible After Login | Visible After Login | |
| Drying Time | Visible After Login | Visible After Login | |
| Hotrunner Temperature | Visible After Login | Visible After Login | |
| Injection Pressure | Visible After Login | Visible After Login | |
| Injection Rate | Visible After Login | Visible After Login | |
| Mold Temperature | Visible After Login | Visible After Login | |
| Residence Time | Visible After Login | Visible After Login | |
| Residual Moisture Content | Visible After Login | Visible After Login | |