KOPEL® KP3943BM by Kolon ENP is a thermoplastic polyester elastomer grade. Provides good flexibility at low temperature, non-toxicity and high elasticity. Offers high melting viscosity, broad temperature range, good processability than rubber and durability. Possesses good colorability, high hardness (41 D), good appearance, mechanical strength and reliability. Exhibits good heat-, creep-, chemical-, high temperature-, fatigue and weather resistance. Is suitable for processing by injection blow molding. KOPEL® KP3943BM by Kolon ENP is recommended for automotive applications. Complies with ISO 9001, ISO/TS 16949, ISO 14001 and KS I 7001/7002 certificates.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
| Appearance | Visible After Login |
Compliance
| Certifications & Compliance | Visible After Login |
Applications
Recommended markets
Conversion mode
Availability
Product Status:Visible After Login
KOPEL® KP3943BM properties
Flammability properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Flame Rating | 0.0 Visible After Login | Visible After Login | Visible After Login |
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Flexural Modulus | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Hardness, Shore D | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Impact Strength, Notched Izod | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Elongation | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Specific Gravity | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Water Absorption at Saturation | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Melting Point | 0.0 Visible After Login | Visible After Login | Visible After Login |
KOPEL® KP3943BM Processing Guidelines
Other Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Visible After Login | Visible After Login | ||