KOPEL® KP3855FBBL by Kolon ENP is a thermoplastic polyester elastomer grade. Imparts good processability than rubber, broad temperature range and durability. Exhibits good heat-, creep-, chemical-, high temperature-, fatigue and weather resistance. Possesses good mechanical strength, colorability, appearance, softness and reliability. Provides good flexibility at low temperature, non-toxicity and high flowability. Is suitable for processing by injection molding. Used in automotive applications like air bag cover. KOPEL® KP3855FBBL by Kolon ENP complies with RoHS, ISO 9001, ISO/TS 16949, ISO 14001 and KS I 7001/7002 certificates.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
| Appearance | Visible After Login |
Compliance
| Certifications & Compliance | Visible After Login |
Applications
Recommended markets
Applications
Conversion mode
Availability
Product Status:Visible After Login
KOPEL® KP3855FBBL properties
Flammability properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Flame Rating | 0.0 Visible After Login | Visible After Login | Visible After Login |
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Hardness, Shore D | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Impact Strength, Notched Izod | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Elongation | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Abrasion | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Linear Mold Shrinkage | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Specific Gravity | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Water Absorption at Saturation | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Melting Point | 0.0 Visible After Login | Visible After Login | Visible After Login |
KOPEL® KP3855FBBL Processing Guidelines
Other Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Visible After Login | Visible After Login | ||