JSR EXCELINK® 1601B by JSR is a recyclable and eco-friendly dynamic vulcanized thermoplastic olefin elastomer (TPO).
- It exhibits high slipperiness, high melt flow and good moldability.
- It shows excellent adhesion with cured rubbers and wide range of hardness.
- It is suitable for processing by injection molding method.
- It is recommended for corner moldings of weather seals and various types of seals (replacement of urethane foam) such as cutline-, door gap-, hood-, body welt, back light- and drip seal.
- JSR EXCELINK® 1601B is also used in automotive glass run channel, mirror patch gasket and roof rail pad.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
| Color | Visible After Login |
| Appearance | Visible After Login |
Compliance
No data available
Applications
Recommended markets
Conversion mode
Availability
Product Status:Visible After Login
JSR EXCELINK® 1601B properties
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| 100% Elongation at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
| 100% Modulus | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Compression Set | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Hardness, Shore A | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tear Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |