LLDPE 010F18A is a linear low density polyethylene (LLDPE) grade by Indian Oil Corporation. It is produced by nova chemical's sclairtech solution polymerization technology. It does not contain slip and anti-block agents. Exhibits good processability and good mechanical properties. Designed for drip laterals and lamination-, co-extrusion-, stretch cling- and mulch films. LLDPE 010F18A is suitable for processing by blown film extrusion. Complies with IS:10146-1982, IS: 10141-1982 and FDA CFR Title 21,177.1520.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
Compliance
| Food Contact Approval | Visible After Login |
| Certifications & Compliance | Visible After Login |
Applications
Recommended markets
Applications
Conversion mode
Availability
Product Status:Visible After Login
LLDPE 010F18A properties
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Impact Strength, Dart Drop | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tear Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength at Yield, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength at Yield, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength, Ultimate, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength, Ultimate, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Elongation at Break, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Elongation at Break, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
LLDPE 010F18A Processing Guidelines
Extrusion Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Blow-up Ratio (BUR) | Visible After Login | Visible After Login | |
| Die Gap | Visible After Login | Visible After Login | |
| Melt Temperature | Visible After Login | Visible After Login | |