Technical datasheet
Dryflex® SE 60A25G2N A
Supplied byHEXPOL COMPOUNDING- Last Updated on Feb 20, 2026
Dryflex® SE 60A25G2N A by HEXPOL COMPOUNDING is a green, bio-based, recyclable thermoplastic elastomer compound. Offers good surface finish, haptics as well as UV and heat stability. Used in soft-touch grips and handles, sealing and closures, automotive, consumer goods, sports equipment, toys and infant care. Exhibits good adhesion to PE, PP, ABS, PC/ ABS and PET. It is suitable for processing by injection molding. Shows good mechanical behavior such as flexibility and tensile properties. Dryflex® SE 60A25G2N A
can easily be colored to give vibrant and appealing visual impact.
Product family:
Chemical family:
Product Type:
| Bio Based | Visible After Login |
| Bio Based content | Visible After Login |
Compliance
No data available
Applications
Recommended markets
Applications
Conversion mode
Availability
Product Status:Visible After Login
Dryflex® SE 60A25G2N A properties
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| CS | 0.0 Visible After Login | Visible After Login | Visible After Login |
| CS | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Elongation at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Hardness, Shore A | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tear Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Fogging | 0.0 Visible After Login | Visible After Login | Visible After Login |
Dryflex® SE 60A25G2N A Processing Guidelines
Injection Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Cooling Time, 2 mm Section | Visible After Login | Visible After Login | |
| Cooling Time, 2-6 mm Section | Visible After Login | Visible After Login | |
| Material Cushion | Visible After Login | Visible After Login | |
Injection Molding Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Compression Ratio | Visible After Login | Visible After Login | |
| Decompression | Visible After Login | Visible After Login | |
| Injection Pressure | Visible After Login | Visible After Login | |
| Screw Speed | Visible After Login | Visible After Login | |