Technical datasheet
Dryflex® EP 80A36G1N U
Supplied byHEXPOL COMPOUNDING- Last Updated on Jun 30, 2026
Dryflex® EP 80A36G1N U by HEXPOL COMPOUNDING is a recyclable, bio-based, green thermoplastic olefin elastomer compound. Exhibits good adhesion to PE, PP, ABS, PC/ ABS and PET. Offers good surface finish, haptics as well as UV and heat stability. It is suitable for processing by injection molding. It can easily be colored to give vibrant and appealing visual impact. Used in soft-touch grips and handles, sealing and closures, automotive, consumer goods, sports equipment, toys and infant care. Dryflex® EP 80A36G1N U by HEXPOL COMPOUNDING shows good mechanical behavior such as flexibility and tensile properties.
Product family:
Chemical family:
Product Type:
| Bio Based | Visible After Login |
| Bio Based content | Visible After Login |
Compliance
No data available
Applications
Recommended markets
Applications
Conversion mode
Availability
Product Status:Visible After Login
Dryflex® EP 80A36G1N U properties
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| 100% Modulus, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Hardness, Shore A | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tear Strength, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Elongation at Break, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
Dryflex® EP 80A36G1N U Processing Guidelines
Injection Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Cooling Time, 2 mm Section | Visible After Login | Visible After Login | |
| Cooling Time, 2-6 mm Section | Visible After Login | Visible After Login | |
| Material Cushion | Visible After Login | Visible After Login | |
Injection Molding Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Compression Ratio | Visible After Login | Visible After Login | |
| Decompression | Visible After Login | Visible After Login | |
| Injection Pressure | Visible After Login | Visible After Login | |
| Screw Speed | Visible After Login | Visible After Login | |