Technical datasheet
Dryflex® EP 70A34G1N U
Supplied byHEXPOL COMPOUNDING- Last Updated on Jun 30, 2026
Dryflex® EP 70A34G1N U by HEXPOL COMPOUNDING thermoplastic olefin elastomer is a recyclable, bio-based, green compound. Offers good surface finish, haptics as well as UV and heat stability. It is suitable for processing by injection molding. Exhibits good adhesion to PE, PP, ABS, PC/ ABS and PET. It can easily be colored to give vibrant and appealing visual impact. Used in soft-touch grips and handles, sealing and closures, automotive, consumer goods, sports equipment, toys and infant care. Dryflex® EP 70A34G1N U shows good mechanical behavior such as flexibility and tensile properties.
Product family:
Chemical family:
Product Type:
| Bio Based | Visible After Login |
| Bio Based content | Visible After Login |
Compliance
No data available
Applications
Recommended markets
Applications
Conversion mode
Availability
Product Status:Visible After Login
Dryflex® EP 70A34G1N U properties
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| 100% Modulus | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Elongation at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Hardness, Shore A | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tear Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
Dryflex® EP 70A34G1N U Processing Guidelines
Injection Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Cooling Time, 2 mm Section | Visible After Login | Visible After Login | |
| Cooling Time, 2-6 mm Section | Visible After Login | Visible After Login | |
| Material Cushion | Visible After Login | Visible After Login | |
Injection Molding Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Compression Ratio | Visible After Login | Visible After Login | |
| Decompression | Visible After Login | Visible After Login | |
| Injection Pressure | Visible After Login | Visible After Login | |
| Screw Speed | Visible After Login | Visible After Login | |