Technical datasheet
INOFLON® M295
Supplied byGujarat Fluorochemicals (Inox Group)- Last Updated on Dec 6, 2023
INOFLON® M295 by Gujarat Fluorochemicals (Inox Group) is a free flowing, granular, chemically modified polytetrafluoroethylene (PTFE) resin. Exhibits high performance, low melt viscosity, low permeability, low void content, good weldability, good transparency, mold filling behaviour, low deformation under load, good electrical and mechanical properties. Designed for processing by compression, automated and iso-static molding. Recommended for gaskets, seal rings, valve seats or bearing pads, pressure house bearings, linings and encapsulations. INOFLON® M295 complies with REACH Directive EC 1907/2006, RoHS Directive 2011/65/EU, USP Class VI, FDA Regulation 21 CFR 177.1550 and EC 10 2011 (Amendment to EU 2002/72/EC) for articles intended to come into contact with foodstuffs.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
| Appearance | Visible After Login |
Compliance
| Food Contact Approval | Visible After Login |
| Certifications & Compliance | Visible After Login |
Applications
Recommended markets
Conversion mode
Availability
Product Status:Visible After Login
INOFLON® M295 properties
Electrical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Dielectric Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
Flammability properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Auto-ignition Temperature | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Auto-ignition Temperature | 0.0 Visible After Login | Visible After Login | Visible After Login |
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Tensile Elongation | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density, Bulk | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Particle Size, Average | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Linear Mold Shrinkage | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Specific Gravity | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Melting Point | 0.0 Visible After Login | Visible After Login | Visible After Login |