Technical datasheet
Terratek® BD3003 Blown Film
Supplied byGreen Dot Bioplastics- Last Updated on Dec 13, 2022
Terratek® BD3003 Blown Film by Green Dot Bioplastics is a proprietary blend of natural and synthetic biodegradable polyesters. It is suitable for blown and cast film. It can be processed by extrusion. This resin is made from polymers which pass industry standards for composting. It has 30% by weight biomass content. It exhibits puncture resistance, tear strength and low modulus results in a soft flexible film. It is a heat sealable grade.
Product family:
Chemical family:
Product Type:
| Bio Based | Visible After Login |
| Bio Based content | Visible After Login |
Compliance
No data available
Applications
Recommended markets
No data available
Conversion mode
Availability
Product Status:Visible After Login
Terratek® BD3003 Blown Film properties
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Impact Strength, Dart Drop | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tear Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tear Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Elongation, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Elongation, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Film Thickness | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Gas Transmission Rate, Oxygen | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Specific Gravity | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Water Vapor Transmission Rate (WVTR) | 0.0 Visible After Login | Visible After Login | Visible After Login |
Terratek® BD3003 Blown Film Processing Guidelines
Extrusion Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Chill Roll Temperature | Visible After Login | Visible After Login | |
| Die Temperature | Visible After Login | Visible After Login | |
| Drying Temperature | Visible After Login | Visible After Login | |
| Drying Time (Desiccant Dryer) | Visible After Login | Visible After Login | |
| Feed Zone Temperature | Visible After Login | Visible After Login | |
| Front Zone Temperature | Visible After Login | Visible After Login | |
| Melt Temperature | Visible After Login | Visible After Login | |
| Middle Zone Temperature | Visible After Login | Visible After Login | |
| Moisture Content (Karl Fischer) | Visible After Login | Visible After Login | |