Technical datasheet
TAIRILAC ABS AE8000
Supplied byFormosa Chemicals & Fibre- Last Updated on Jun 14, 2023
TAIRILAC ABS AE8000 by Formosa Chemicals & Fibre is a milky off-white acrylonitrile butadiene styrene (ABS) grade. It exhibits super high impact strength and high rigidity. It is suitable for processing by extrusion. It is used in crash helmets, pipes and shoe heels. It complies with REACH, SGS, UL rating, SONY standard (SS-00259) and certificates of environmental protection. TAIRILAC ABS AE8000 also meets with the directives of RoHS 2002/95/EC, 2003/11/EC, EN71 part 3 and 2011/65/EU Annex II.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
| Appearance | Visible After Login |
Compliance
| Certifications & Compliance | Visible After Login |
Applications
Recommended markets
Applications
Conversion mode
Availability
Product Status:Visible After Login
TAIRILAC ABS AE8000 properties
Flammability properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Flame Rating, UL 94 | 0.0 Visible After Login | Visible After Login | Visible After Login |
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Flexural Modulus | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Flexural Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Hardness, Rockwell | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Impact Strength, Izod | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Linear Mold Shrinkage | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Specific Gravity | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Heat Deflection Temperature (HDT), Annealed | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Heat Deflection Temperature (HDT), Unannealed | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Vicat Softening Temperature | 0.0 Visible After Login | Visible After Login | Visible After Login |
TAIRILAC ABS AE8000 Processing Guidelines
Extrusion Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Cooling Roll Temperature (Lower) | Visible After Login | Visible After Login | |
| Cooling Roll Temperature (Middle) | Visible After Login | Visible After Login | |
| Cooling Roll Temperature (Upper) | Visible After Login | Visible After Login | |
| Die Temperature | Visible After Login | Visible After Login | |
| Pre-Drying Temperature | Visible After Login | Visible After Login | |
| Pre-drying Time | Visible After Login | Visible After Login | |
| Screw Temperature | Visible After Login | Visible After Login | |