Flontech® FT-CARR15-1 by Flontech is a 85 % virgin, non-flammable, thermally conductive polytetrafluoroethylene (PTFE) fluoropolymer grade. It is reinforced with 15 % soft carbon. It is an energy saving, low maintenance and reliable grade. Exhibits good dry running characteristics, hardness and good electrical conductivity when highly filled. Offers improved lubricity and resistance to advanced pressure, hydrofluoric & hydrochloric acid and strong bases (except oxidizing environments). Flontech® FT-CARR15-1 by Flontech is suitable for processing by compression molding. Recommended for food, drug and water applications, sealings & bearings in piston compressors, V-rind-packings, lipseals and piston-rod pack.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
Compliance
No data available
Applications
Recommended markets
Conversion mode
Availability
Product Status:Visible After Login
Flontech® FT-CARR15-1 properties
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Hardness, Rockwell | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Elongation | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density, Bulk | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Hardness, Shore | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Diametric Shrinkage | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Specific Gravity | 0.0 Visible After Login | Visible After Login | Visible After Login |
Flontech® FT-CARR15-1 Processing Guidelines
Compression Molding Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Compaction Speed | Visible After Login | Visible After Login | |
| Dwell Time (at Max Pressure, 10 mm height) | Visible After Login | Visible After Login | |
| Moisture Content (Suggested) | Visible After Login | Visible After Login | |
| Mold Tolerance | Visible After Login | Visible After Login | |
| Pre-forming Pressure | Visible After Login | Visible After Login | |
| Pre-forming Speed | Visible After Login | Visible After Login | |
| Pressure Release Time | Visible After Login | Visible After Login | |
| Temperature Range | Visible After Login | Visible After Login | |