Technical datasheet
ExxonMobil™ LLDPE LL 1002.90
Supplied byExxonMobil Chemical- Last Updated on Sep 17, 2020
ExxonMobil™ LLDPE LL 1002.90 by ExxonMobil Chemical is ethylene 1-butene butene linear low density polyethylene (LLDPE), blown film resin. It contains thermal stabilizer additive. Suggested applications include agricultural film, bag in box, food packaging, form fill and seal packaging. Suitable for compounding & film production and cast film applications. It is also used in multilayer packaging film, shoppers, produce bags on a roll and trash can liners. Recommended for freezer and garment film, general & industrial packaging, institutional can liners and mulch film. Films obtained from ExxonMobil™ LLDPE LL 1002.90 have very good tensile and toughness properties.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
| Appearance | Visible After Login |
Compliance
No data available
Applications
Recommended markets
Applications
Conversion mode
Availability
Product Status:Visible After Login
Regional Availability:Visible After Login| Visible After Login| Visible After Login
ExxonMobil™ LLDPE LL 1002.90 properties
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| 1% Secant Modulus, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| 1% Secant Modulus, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Film Tensile Strength at Break, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Film Tensile Strength at Break, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Film Tensile Strength at Yield, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Film Tensile Strength at Yield, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Impact Strength, Dart Drop | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Puncture Force | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tear Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tear Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
Optical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Gloss | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Haze | 0.0 Visible After Login | Visible After Login | Visible After Login |
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Elongation at Break, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Elongation at Break, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Impact Strength, Puncture | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Melting Point | 0.0 Visible After Login | Visible After Login | Visible After Login |
ExxonMobil™ LLDPE LL 1002.90 Processing Guidelines
Extrusion Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Blow-up Ratio | Visible After Login | Visible After Login | |
| Blown Film Line | Visible After Login | Visible After Login | |
| Die Circumference | Visible After Login | Visible After Login | |
| Die Gap | Visible After Login | Visible After Login | |
| Die Rate | Visible After Login | Visible After Login | |
| Film thickness | Visible After Login | Visible After Login | |
| Melt Temperature | Visible After Login | Visible After Login | |