Grilon® CF 6 S by EMS-Grivory (EMS Group) is an extracted polyamide 6-12 [PA 6-12] grade. Possesses barrier properties, high viscosity, low melting point, very high flexibility and toughness, high shrink, very good transparency, very good thermoforming and orientation properties. Is suitable for processing by cast film-, blown film- and other extrusion. Mostly used for the manufacture of both flat and blown coextruded films with temperature sensitive polymers such as PVDC and EVOH. Its potential applications are cook in bag for meat, cheese, deep-draw consumer, medical packaging and asymmetric barrier film structures. Grilon® CF 6 S is used in oriented film packaging. It applies with EU requirements- Food contact and FDA.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
| Color | Visible After Login |
| Appearance | Visible After Login |
Compliance
| Food Contact Approval | Visible After Login |
Applications
Recommended markets
Applications
Conversion mode
Availability
Product Status:Visible After Login
Regional Availability:Visible After Login| Visible After Login| Visible After Login
Grilon® CF 6 S properties
Barrier properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| CO2-Transmission rate | 0.0 Visible After Login | Visible After Login | Visible After Login |
| CO2-Transmission rate | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Moisture vapour transmission rate | 0.0 Visible After Login | Visible After Login | Visible After Login |
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Elmendorf tear resistance | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Elmendorf tear resistance | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Film Tensile Strength at Break, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Film Tensile Strength at Break, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Film Tensile Strength at Yield, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Film Tensile Strength at Yield, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Gelboflextest | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Modulus of Elasticity | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strain | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strain | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strain | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strain | 0.0 Visible After Login | Visible After Login | Visible After Login |
Optical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Gloss | 0.0 Visible After Login | Visible After Login | Visible After Login |
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Moisture Absorption | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Shrink | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tear Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tear Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tear Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tear Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Gas Transmission Rate, Oxygen | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Gas Transmission Rate, Oxygen | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Volume Flow Rate (MVR) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Moisture Absorption | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Water Absorption at Saturation | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Decomposition Temperature | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melting Point | 0.0 Visible After Login | Visible After Login | Visible After Login |
Grilon® CF 6 S Processing Guidelines
Extrusion Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Adapter Temperature | Visible After Login | Visible After Login | |
| Cylinder Zone 1 Temp. | Visible After Login | Visible After Login | |
| Cylinder Zone 2 Temp. | Visible After Login | Visible After Login | |
| Cylinder Zone 3 Temp. | Visible After Login | Visible After Login | |
| Dew point of the desiccant dryer | Visible After Login | Visible After Login | |
| Die Temperature | Visible After Login | Visible After Login | |
| Drying Temperature | Visible After Login | Visible After Login | |
| Drying Time | Visible After Login | Visible After Login | |
| Hopper Temperature | Visible After Login | Visible After Login | |
| Melt Temperature | Visible After Login | Visible After Login | |
| Moisture Content (Suggested) | Visible After Login | Visible After Login | |
| Mold Temperature | Visible After Login | Visible After Login | |
| Screw Compression ratio | Visible After Login | Visible After Login | |
| Screw Length | Visible After Login | Visible After Login | |