Technical datasheet
Ecomass® Compound 4703ZD88
Supplied byEcomass Technologies- Last Updated on May 20, 2025
Ecomass® Compound 4703ZD88 by Ecomass Technologies is an opaque and grey colored, tungsten powder filled thermoplastic polyurethane (TPU) grade. Possesses slight odor and is insoluble in water. Exhibits moderate specific gravity, excellent toughness and flexibility. Provides a non-toxic alternative to lead (Pb). Is suitable for processing by injection molding. Ecomass® Compound 4703ZD88 by Ecomass Technologies is recommended for weighting, balancing, radiation shielding and vibration dampening applications. Complies with RoHS and meets with the requirements of ISO 9001:2008.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
| Color | Visible After Login |
| Appearance | Visible After Login |
Compliance
| Certifications & Compliance | Visible After Login |
Applications
Recommended markets
No data available
Conversion mode
Availability
Product Status:Visible After Login
Ecomass® Compound 4703ZD88 properties
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Elongation at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Flexural Modulus | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Flexural Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Impact Strength, Notched Izod | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Modulus of Elasticity | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
Ecomass® Compound 4703ZD88 Processing Guidelines
Injection Molding Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Back Pressure | Visible After Login | Visible After Login | |
| Cushion | Visible After Login | Visible After Login | |
| Dew Point | Visible After Login | Visible After Login | |
| Drying Temperature | Visible After Login | Visible After Login | |
| Drying Time | Visible After Login | Visible After Login | |
| Fill Time | Visible After Login | Visible After Login | |
| Melt Temperature | Visible After Login | Visible After Login | |
| Minimum Air Flow | Visible After Login | Visible After Login | |
| Mold Temperature | Visible After Login | Visible After Login | |
| Molding Shrinkage | Visible After Login | Visible After Login | |
| Pack (Hold) Time | Visible After Login | Visible After Login | |
| Screw Compression ratio | Visible After Login | Visible After Login | |
| Screw L/D | Visible After Login | Visible After Login | |
| Screw Speed | Visible After Login | Visible After Login | |
| Typical Clamp Tonnage | Visible After Login | Visible After Login | |