Technical datasheet
Ecomass® Compound 2150TU96
Supplied byEcomass Technologies- Last Updated on May 20, 2025
Ecomass® Compound 2150TU96 by Ecomass Technologies is a grey colored, water insoluble, tungsten powder filled polyamide 6-6 (PA 6-6) grade. Exhibits slight odor, good toughness and rigidity. Provides a non-toxic alternative to lead (Pb). Is suitable for processing by injection molding. Ecomass® Compound 2150TU96 is recommended for weighting, balancing and radiation shielding applications. Complies with RoHS and meets with the requirements of ISO 9001:2008.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
| Appearance | Visible After Login |
Compliance
| Certifications & Compliance | Visible After Login |
Applications
Recommended markets
No data available
Conversion mode
Availability
Product Status:Visible After Login
Ecomass® Compound 2150TU96 properties
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Elongation at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Flexural Modulus | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Impact Strength, Notched Izod | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Modulus of Elasticity | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
Ecomass® Compound 2150TU96 Processing Guidelines
Injection Molding Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Back Pressure | Visible After Login | Visible After Login | |
| Cushion | Visible After Login | Visible After Login | |
| Dew Point | Visible After Login | Visible After Login | |
| Drying Temperature | Visible After Login | Visible After Login | |
| Drying Time | Visible After Login | Visible After Login | |
| Fill Time | Visible After Login | Visible After Login | |
| Melt Temperature | Visible After Login | Visible After Login | |
| Minimum Air Flow | Visible After Login | Visible After Login | |
| Moisture Content | Visible After Login | Visible After Login | |
| Mold Temperature | Visible After Login | Visible After Login | |
| Molding Shrinkage | Visible After Login | Visible After Login | |
| Pack (Hold) Time | Visible After Login | Visible After Login | |
| Screw Compression ratio | Visible After Login | Visible After Login | |
| Screw L/D | Visible After Login | Visible After Login | |
| Screw Speed | Visible After Login | Visible After Login | |
| Typical Clamp Tonnage | Visible After Login | Visible After Login | |