Technical datasheet
Eastman Amphora™ 3D Polymer HT5300
Supplied byEastman- Last Updated on Aug 31, 2021
Eastman Amphora™ 3D Polymer HT5300 by Eastman is a low-odor, styrene-free copolyester grade. It exhibits good clarity & gloss, good dimensional stability, enhanced aesthetics, and excellent temperature resistance & toughness. It offers wide range of processing temperature, good workability and property retention characteristics. It is designed for use in the production of high quality 3D filaments that exhibits advanced overhang ability, good looks, and superior melt strength. BPA free Eastman Amphora™ 3D Polymer HT5300 allows for 3D printing, which offers outstanding toughness and chemical resistance. Complies with the U.S. Food and Drug Administration (FDA) regulations.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
| Appearance | Visible After Login |
Compliance
| Food Contact Approval | Visible After Login |
Applications
Recommended markets
No data available
Conversion mode
Availability
Product Status:Visible After Login
Eastman Amphora™ 3D Polymer HT5300 properties
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Elongation at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Elongation at Yield | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Flexural Modulus | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Flexural Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Hardness, Rockwell R | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Impact Strength, Notched Izod | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Tensile Strength at Yield | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Specific Gravity | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Deflection Temperature at 0.46 MPa (66 psi) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Deflection Temperature at 1.8 MPa (264 psi) | 0.0 Visible After Login | Visible After Login | Visible After Login |
Eastman Amphora™ 3D Polymer HT5300 Processing Guidelines
3D Printing Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Cooling | Visible After Login | Visible After Login | |
| Heated Bed Temperature | Visible After Login | Visible After Login | |
| Layer Height | Visible After Login | Visible After Login | |
| Melt Temperature | Visible After Login | Visible After Login | |
| Minimal Layer Time | Visible After Login | Visible After Login | |
| Perimeter | Visible After Login | Visible After Login | |
| Speed | Visible After Login | Visible After Login | |