Technical datasheet
AFFINITY™ PL 1281G1 Polyolefin Plastomer
Supplied byDow- Last Updated on May 29, 2025
AFFINITY™ PL 1281G1 Polyolefin Plastomer by Dow is an ethylene alpha-olefin plastomer produced via INSITE™ technology. It contains slip additive. It is suitable for seal layer in a variety of demanding high-speed packaging applications, including food, consumer, health and hygiene products. It provides extremely low coefficient of friction, very low seal initiation temperature and abuse resistance. AFFINITY™ PL 1281G1 Polyolefin Plastomer is ideal for cast film extrusion and compounding applications.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
Compliance
No data available
Applications
Recommended markets
Conversion mode
Availability
Product Status:Visible After Login
Regional Availability:Visible After Login| Visible After Login| Visible After Login
AFFINITY™ PL 1281G1 Polyolefin Plastomer properties
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Film Elongation at Break, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Film Elongation at Break, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Film Tensile Strength at Break, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Film Tensile Strength at Break, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Film Tensile Strength at Yield, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Film Tensile Strength at Yield, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tear Strength, MD | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tear Strength, TD | 0.0 Visible After Login | Visible After Login | Visible After Login |
Optical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Gloss | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Haze | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Melting Point | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Seal Initiation Temperature | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Vicat Softening Temperature | 0.0 Visible After Login | Visible After Login | Visible After Login |