Tefzel™ ETFE 750 by Chemours is an ethylene tetrafluoroethylene (ETFE) fluoroplastic grade. Used in appliance wire, motor lead wire and insulation. Possessses good toughness, strength, good dielectric strength and low coefficient of friction. Exhibits good flexibility, high temperature rating & heat and chemical resistance. Tefzel™ ETFE 750 is suitable for processing by extrusion. Meets the U.S. Environmental Protection Agency (EPA) 2010/15 PFOA regulations and UL subject 758 for appliance wiring material.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
| Appearance | Visible After Login |
Compliance
| Certifications & Compliance | Visible After Login |
Applications
Recommended markets
Applications
Conversion mode
Availability
Product Status:Visible After Login
Tefzel™ ETFE 750 properties
Flammability properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Limiting Oxygen Index (LOI) | 0.0 Visible After Login | Visible After Login | Visible After Login |
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Flexural Modulus | 0.0 Visible After Login | Visible After Login | Visible After Login |
| MIT Folding Endurance | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Elongation | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Elongation | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Elongation | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Elongation | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Elongation | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Specific Gravity | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Maximum Service Temperature, Air | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melting Point | 0.0 Visible After Login | Visible After Login | Visible After Login |
Tefzel™ ETFE 750 Processing Guidelines
Extrusion Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Adapter Temperature | Visible After Login | Visible After Login | |
| Barrel Center Zone Temperature | Visible After Login | Visible After Login | |
| Barrel Front Zone Temperature | Visible After Login | Visible After Login | |
| Barrel Rear Zone Temperature | Visible After Login | Visible After Login | |
| Crosshead Temperature | Visible After Login | Visible After Login | |
| DieTemperature | Visible After Login | Visible After Login | |
| Draw Down ratio | Visible After Login | Visible After Login | |
| Draw Ratio Balance (DRB) | Visible After Login | Visible After Login | |
| Melt Temperature | Visible After Login | Visible After Login | |