Technical datasheet
Dynaflex™ G7431-1001-00
Supplied byAvient (Formerly PolyOne)- Last Updated on Jun 3, 2023
Dynaflex™ G7431-1001-00 by Avient (Formerly PolyOne) is a natural colored thermoplastic elastomer (TPE) grade. Provides excellent heat stability, excellent tear strength, superior molded aesthetics, good surface finish and copper contact stability. Is a recyclable material, has low coefficient of friction, and allows overmold adhesion to polypropylene. Exhibits ozone- and UV resistance. Is suitable for processing by injection molding. Dynaflex™ G7431-1001-00 is used in applications requiring a tough and durable material such as households products/ consumer goods, appliance components, overmolding, gardening, electrical/ electronic- and outdoor applications. Complies with FDA and RoHS.
Product family:
Product Type:
| Bio Based content | Visible After Login |
| Color | Visible After Login |
| Appearance | Visible After Login |
Compliance
| Food Contact Approval | Visible After Login |
| Certifications & Compliance | Visible After Login |
Applications
Recommended markets
Conversion mode
Availability
Product Status:Visible After Login
Regional Availability:Visible After Login| Visible After Login| Visible After Login
Dynaflex™ G7431-1001-00 properties
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Compression Set | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Elongation at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Hardness, Shore A | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tear Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
Other properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Viscosity, Apparent | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Linear Mold Shrinkage, Flow | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Specific Gravity | 0.0 Visible After Login | Visible After Login | Visible After Login |
Dynaflex™ G7431-1001-00 Processing Guidelines
Injection Molding Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Back Pressure | Visible After Login | Visible After Login | |
| Boost Pressure (1st Stage) | Visible After Login | Visible After Login | |
| Front Temperature | Visible After Login | Visible After Login | |
| Hold Pressure (2nd Stage) | Visible After Login | Visible After Login | |
| Hold Time (Thick Part) | Visible After Login | Visible After Login | |
| Hold Time (Thin Part) | Visible After Login | Visible After Login | |
| Injection Speed | Visible After Login | Visible After Login | |
| Middle Temperature | Visible After Login | Visible After Login | |
| Mold Temperature | Visible After Login | Visible After Login | |
| Nozzle Temperature | Visible After Login | Visible After Login | |
| Rear Temperature | Visible After Login | Visible After Login | |
| Screw Speed | Visible After Login | Visible After Login | |
| Suggested Max Regrind | Visible After Login | Visible After Login | |