Tuftec™ H1062 by Asahi Kasei is a hydrogenated styrene ethylene butylene styrene copolymer (SEBS) grade. Exhibits strong heat seal- & good mechanical property at low temperature and good transparency.
- It can improve impact resistance at room & low temperature.
- It is used as an impact modifier of polypropylene (PP).
- It can be used for films for IV bags, elastic ribbon films, no-coat airbag covers, bumpers and medical & pharmaceutical films applications when blended with PP.
- Tuftec™ H1062 complies with FDA 21 CFR FCN821 and EU Directive 10/2011 regulations.
Product family:
Product Type:
| Bio Based content | Visible After Login |
| Appearance | Visible After Login |
Compliance
| Food Contact Approval | Visible After Login |
| Certifications & Compliance | Visible After Login |
Applications
Recommended markets
Applications
Availability
Product Status:Visible After Login
Tuftec™ H1062 properties
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| 300% Modulus | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Hardness, Shore A | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Elongation | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melt Mass-Flow Rate (MFR or MFI = Melt Flow Index or MI = Melt Index) | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Styrene/Ethylene-Butylene Ratio | 0.0 Visible After Login | Visible After Login | Visible After Login |