HA-5010 SA by 3H Vinacom is a silane cross-linkable polyethylene compound. It is insoluble in organic solvent and is designed for use with extrusion technology. Provides excellent surface without scorching over a wide temperature range. Suitable for below 10 kva or low voltage wire and cables. Both the grafting and wire coating process are performed in one single step in the usual wire and cable production. Difficulty in maintaining dimensional accuracy during cross-linking is avoided because the temperature of cross-linking is below the crystalline melting point of the polymer. HA-5010 SA complies with the standard of IEC 60502 or TCVN 5935.
Product family:
Chemical family:
Product Type:
| Bio Based content | Visible After Login |
| CI Name | Visible After Login |
Compliance
| Certifications & Compliance | Visible After Login |
Applications
Recommended markets
Conversion mode
Availability
Product Status:Visible After Login
HA-5010 SA properties
Electrical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Dielectric Constant | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Dissipation Factor | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Volume Resistivity | 0.0 Visible After Login | Visible After Login | Visible After Login |
Mechanical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Elongation at Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Retention of Elongation At Break | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Retention of Tensile Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Tensile Strength | 0.0 Visible After Login | Visible After Login | Visible After Login |
Physical properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Density | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Linear Mold Shrinkage | 0.0 Visible After Login | Visible After Login | Visible After Login |
Thermal properties
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| HOT Test | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Melting Point | 0.0 Visible After Login | Visible After Login | Visible After Login |
| Set Test | 0.0 Visible After Login | Visible After Login | Visible After Login |
HA-5010 SA Processing Guidelines
Extrusion Processing Guidelines
| Properties | Value & unit | Test condition | Test method |
|---|---|---|---|
| Compression ratio | Visible After Login | Visible After Login | |
| Cylinder Zone 1 Temp. | Visible After Login | Visible After Login | |
| Cylinder Zone 2 Temp. | Visible After Login | Visible After Login | |
| Cylinder Zone 3 Temp. | Visible After Login | Visible After Login | |
| Cylinder Zone 4 Temp. | Visible After Login | Visible After Login | |
| Cylinder Zone 5 Temp. | Visible After Login | Visible After Login | |
| Die Temperature | Visible After Login | Visible After Login | |
| Head Temperature | Visible After Login | Visible After Login | |
| L/D Ratio | Visible After Login | Visible After Login | |
| Neck Temperature | Visible After Login | Visible After Login | |