Polyether Imide (PEI) for Plastic Parts

ULTEM™ resin 1000 by SABIC is amorphous, transparent, flame-retarded polyetherimide (PEI) grade. It is metallizable and transparent to microwave radiation & near IR. Provides high stiffness, strength, hydrolytic stability, low creep sensitivity, shrinkage, good metal adhesion, low smoke and toxicity. Offers radiation resistance (gamma, x-ray), chemical-, UV-C resistance, high electric breakdown strength (BDS) and high heat resistance. Exhibits excellent mechanicals in broad temperature range, good dimensional stability and excellent electrical properties. ULTEM™ resin 1000 is suitable for processing by additive manufacturing, injection compression molding, compression molding, foam-, film- & profile extrusion, injection molding, extrusion blow molding and extrusion compounding. Used in rigid packaging, aircraft interiors, defense, outdoor, lawn & landscape, semiconductors, fossil, electric vehicle, heavy truck, automotive interiors, electrical devices & displays, specialty vehicles, ophthalmics, rail, wind energy, sport/leisure, consumer packaging. It is also recommended for personal accessory, textile, lighting, energy storage, home appliances, servomotor, bus, electronic, electrical components, industrial, automotive under the hood, commercial appliance and recreational vehicle. Complies with RoHS, UL94 V-0, V-2 and 5V ratings and aerospace FAR 25.853. The natural, uncolored, material is halogen-free according to standards IEC 61249-2-21, IPC 4101E and JEDEC JS709B. The base material is transparent amber colored but is also available in custom colors- transparent and opaque.
ISCC+ certified bio-based version also available for this grade.

SILTEM™ Resin STM1500 (Europe) by SABIC is a PFAS-free, flexible polyetherimide(PEI)-siloxane copolymer for cable and wire coatings. Offers high tensile elongation, chemical resistance- & heat resistance and good dimensional stability. It is a non-halogenated flame retardant grade. Exhibits low corrosivity & toxicity and smoke emission. SILTEM™ Resin STM1500 (Europe) can be processed by extrusion. Used in aerospace, defense, mass transportation like rail, electronics, material handling, electricals and industrial material handling. Complies with RoHS and UL 94 V-1 flame rating.

ULTEM™ resin HU1110 (Europe) by SABIC is an unreinforced, high stiffness, enhanced flow polyetherimide grade. It exhibits low creep sensitivity, low shrinkage, good metal adhesion, high strength and high heat resistance. It offers good mechanical properties in broad temperature range. It provides hydrolytic stability, good dimensional stability, chemical resistance, low smoke and toxicity. It is biocompatible (ISO 10993 or USP Class VI) and healthcare management of change applies. It is steam-, gamma-, EtO- and E-beam sterilizable. ULTEM™ resin HU1110 (Europe) is processed by injection molding. It is suitable for pharmaceutical, surgical, ophthalmics, personal accessory, respiratory & sleep therapy, personal recreation, healthcare, patient testing, fluid & blood handling, medical facility infrastructure and consumer applications. It is food contact compliant.

ULTEM™ resin HU1110 (Asia) by SABIC is an unreinforced, enhanced flow, high stiffness polyetherimide grade. It offers good mechanical properties in broad temperature range. It exhibits low creep sensitivity, low shrinkage, good metal adhesion, high strength and high heat resistance. It provides hydrolytic stability, good dimensional stability, chemical resistance, low smoke and toxicity. It is biocompatible (ISO 10993 or USP Class VI) and healthcare management of change applies. It is steam-, gamma-, EtO- and E-beam sterilizable. ULTEM™ resin HU1110 (Asia) is processed by injection molding. Recommended for pharmaceutical, surgical, ophthalmics, personal accessory, respiratory & sleep therapy, personal recreation, healthcare, patient testing, fluid & blood handling, medical facility infrastructure and consumer applications. The grade is food contact compliant.

ULTEM™ resin HU1110 (Americas) by SABIC is an unreinforced, enhanced flow, high stiffness polyetherimide grade. It is biocompatible (ISO 10993 or USP Class VI) and healthcare management of change applies. It is steam-, gamma-, EtO- and E-beam sterilizable. It offers good mechanical properties in broad temperature range. It exhibits low creep sensitivity, low shrinkage, good metal adhesion, high strength and high heat resistance. It provides hydrolytic stability, good dimensional stability, chemical resistance, low smoke and toxicity. ULTEM™ resin HU1110 (Americas) is suitable for pharmaceutical, surgical, ophthalmics, personal accessory, respiratory & sleep therapy, personal recreation, healthcare, patient testing, fluid & blood handling, medical facility infrastructure and consumer applications. It is processed by injection molding. The grade is food contact compliant.

ULTEM™ resin 1010 by SABIC is a general purpose, amorphous, metallizable, flame-retardant polyetherimide (PEI) grade. It offers high flow, durability, excellent mechanical properties and dimensional stability. It provides easy processability, low toxicity and smoke evolution. Exhibits hydrolytic stability, low creep sensitivity, low shrinkage, high electric breakdown strength (BDS), UV-C and radiation resistance (gamma, x-ray). It provides high heat resistance, chemical resistance and stability of physical & mechanical properties at elevated temperatures with high strength, modulus and stiffness up to 200°C. It retains strength and resists stress cracking when exposed to automotive, aircraft and hydrolytic fluids, aliphatic hydrocarbons, alcohols, acids and weak aqueous solutions. Shows good metal adhesion and is transparent to microwave radiation & near IR. ULTEM™ resin 1010 is suitable for processing by injection molding, additive manufacturing, extrusion blow molding, film-, foam & profile extrusion, compression molding, extrusion compounding, hot rolling and injection compression molding. Recommended for rigid packaging, aircraft interiors, defense, outdoor lawn & landscape, semiconductors, fossil, electric vehicle, heavy truck, automotive interiors, electrical devices & displays and specialty vehicles. It is also used in ophthalmics, rail, wind energy, sport/leisure, consumer packaging, personal accessory, textile, lighting, energy storage, home appliances, servomotor, bus, and electronic material handling. Suitable for electrical components & infrastructure, personal recreation, industrial material handling, composite, automotive under the hood, commercial appliance and recreational vehicle. It complies with RoHS, aerospace FAR 25.853, UL 94 V-0 and 94 5VA flame rating.
ISCC+ certified bio-based version also available for this grade.

SILTEM™ Resin STM1500 (Americas) by SABIC is a PFAS-free, flexible polyetherimide(PEI)-siloxane copolymer for cable and wire coatings. It is a non-halogenated, flame retardant grade. Exhibits low corrosivity, toxicity and smoke emission. Offers high tensile elongation, energy management, excellent chemical- & heat resistance and good dimensional stability. SILTEM™ Resin STM1500 (Americas) can be processed by injection molding. Used in automotive, aerospace, mass transportation like rail, electronics, electrical, industrial material handling. It is RoHS compliant.

LNP™ THERMOCOMP™ Compound EF006H by SABIC is a compound based on PFAS-free, polyetherimide (PEI) resin that is filled with 30% glass fiber. It offers high stiffness & strength and temperature resistance. It can be processed by injection molding. LNP™ THERMOCOMP™ Compound EF006H is recommended for pharmaceutical & industrial packaging, drug delivery, surgical devices, general healthcare and patient testing.

ULTEM™ resin HU1010 by SABIC is an unreinforced, amorphous, high stiffness polyetherimide (PEI) resin that may offer a high glass transition temperature (Tg) of 217°C and improved flow. It offers steam-, peroxide-, gamma-, EtO-, UV-C- and E-beam resistance for repeated sterilization cycles. It features excellent mechanical, electrical and dimensional properties up to high temperatures. It provides very good chemical resistance for an amorphous material. It provides hydrolytic stability, low smoke and toxicity. It exhibits low creep sensitivity, low shrinkage, good metal adhesion, high strength and high heat resistance. It is transparent amber colored but is also available in custom colors - transparent and opaque. It is suitable for additive manufacturing, injection compression molding, compression molding, foam extrusion, extrusion blow molding, film extrusion, injection molding, profile extrusion, extrusion and extrusion compounding. ULTEM™ resin HU1010 is designed for pharmaceutical, surgical, ophthalmics, personal accessory, respiratory, sleep therapy, personal recreation, healthcare, patient testing, fluid and blood handling, medical facility and infrastructure. It is an inherent flame retardant offering UL94 V0 and 5V ratings. It is biocompatible (ISO 10993 or USP Class VI) and healthcare management of change applies. The grade is RoHS- and food compliant (FDA, CN, EC).

SILTEM™ Resin STM1600 (Americas) by SABIC is a PFAS- & halogen-free (according VDE 0472), flame retardant, flexible polyetherimide (PEI) - siloxane copolymer designed for wire and cable applications. It offers low smoke emission, energy management and toxicity. It is an amber colored transparent material that can be self-colored and easily processed on conventional equipment. SILTEM™ Resin STM1600 (Americas) is suitable for flexible profiles and injection molded parts. It is processed by extrusion. It is recommended for aerospace, electrical and electronics, mass transportation such as rail, industrial, material handling & defense applications.