Plastics and elastomers for Renewable Energy

ULTEM™ resin 1000 by SABIC is amorphous, transparent, flame-retarded polyetherimide (PEI) grade. It is metallizable and transparent to microwave radiation & near IR. Provides high stiffness, strength, hydrolytic stability, low creep sensitivity, shrinkage, good metal adhesion, low smoke and toxicity. Offers radiation resistance (gamma, x-ray), chemical-, UV-C resistance, high electric breakdown strength (BDS) and high heat resistance. Exhibits excellent mechanicals in broad temperature range, good dimensional stability and excellent electrical properties. ULTEM™ resin 1000 is suitable for processing by additive manufacturing, injection compression molding, compression molding, foam-, film- & profile extrusion, injection molding, extrusion blow molding and extrusion compounding. Used in rigid packaging, aircraft interiors, defense, outdoor, lawn & landscape, semiconductors, fossil, electric vehicle, heavy truck, automotive interiors, electrical devices & displays, specialty vehicles, ophthalmics, rail, wind energy, sport/leisure, consumer packaging. It is also recommended for personal accessory, textile, lighting, energy storage, home appliances, servomotor, bus, electronic, electrical components, industrial, automotive under the hood, commercial appliance and recreational vehicle. Complies with RoHS, UL94 V-0, V-2 and 5V ratings and aerospace FAR 25.853. The natural, uncolored, material is halogen-free according to standards IEC 61249-2-21, IPC 4101E and JEDEC JS709B. The base material is transparent amber colored but is also available in custom colors- transparent and opaque.
ISCC+ certified bio-based version also available for this grade.

NORYL™ Resin V0150B (Europe) by SABIC is a PFAS-free, non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable, contains non-brominated, non-chlorinated & non-halogenated flame retardant and carries a UL94 flame rating of V-0/V-1 at 1.5 mm along with a UL746C outdoor suitability rating of F1. NORYL™ Resin V0150B (Europe) exhibits good low temperature impact resistance, damp heat performance, low moisture absorption and good dimensional stability. It shows hydrolytic stability, low warpage, shrinkage, moisture absorption, high temperature resistance and specific gravity. This material is an excellent candidate for parts that are exposed to tough outdoor environments, such as solar / photovoltaic (PV) junction boxes and outdoor housings and enclosures. It is recommended for building components, home- & commercial appliances, electrical industrial applications, energy management, electronic components, mobile phones and computers & tablets.

NORYL™ Resin V0150B (Americas) by SABIC is a PFAS-free, non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable, contains non-brominated, non-chlorinated & non-halogenated flame retardant and carries a UL94 flame rating of V-0/V-1 at 1.5 mm along with a UL746C outdoor suitability rating of F1. NORYL™ Resin V0150B (Americas) exhibits good low temperature impact resistance, damp heat performance, low moisture absorption and good dimensional stability. It shows hydrolytic stability, low warpage, shrinkage, moisture absorption, high temperature resistance and specific gravity. This material is an excellent candidate for parts that are exposed to tough outdoor environments, such as solar / photovoltaic (PV) junction boxes and outdoor housings and enclosures. It is recommended for building components, energy management, home- & commercial appliances, electrical industrial applications, electronic components, mobile phones and computers & tablets.

NORYL™ Resin V0150B (Asia) by SABIC is a PFAS-free, non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable, contains non-brominated, non-chlorinated & non-halogenated flame retardant and carries a UL94 flame rating of V-0/V-1 at 1.5 mm along with a UL746C outdoor suitability rating of F1. NORYL™ Resin V0150B (Asia) exhibits good low temperature impact resistance, damp heat performance, low moisture absorption and good dimensional stability. It shows hydrolytic stability, low warpage, shrinkage, moisture absorption, high temperature resistance and specific gravity. This material is an excellent candidate for parts that are exposed to tough outdoor environments, such as solar / photovoltaic (PV) junction boxes and outdoor housings and enclosures. It is recommended for building components, energy management, home- & commercial appliances, electrical industrial applications, electronic components, mobile phones and computers & tablets.

NORYL™ Resin SE1GFN3 (Europe) by SABIC is a PFAS-free, 30% glass fiber reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS). This injection moldable grade contains non-brominated, non-chlorinated & non-halogenated flame retardant and carries a UL94 flame rating of V-1 at 1.5 mm along with UL746C outdoor suitability rating of F1 and RTI of 110°C. NORYL™ Resin SE1GFN3 (Europe) exhibits high heat resistance, good dielectric strength, dimensional stability, hydrolytic stability, and very low moisture absorption. It offers low creep sensitivity, good stiffness and low warpage, shrinkage & specific gravity. This material is an excellent candidate for a variety of applications such as solar frames, unattended power supply (UPS) inverter, charger, indoor and outdoor electrical enclosures, housings, connectors and wall plates, sockets & switches. It is suitable for automotive EV, electronic and electrical industrial applications such as energy management, mobile phones, computers and tablets.

NORYL™ Resin SE1GFN3 (Asia) by SABIC is a PFAS-free, 30% glass fiber reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS). This injection moldable grade contains non-brominated, non-chlorinated & non-halogenated flame retardant and carries a UL94 flame rating of V-1 at 1.5 mm along with UL746C outdoor suitability rating of F1 and RTI of 110°C. NORYL™ Resin SE1GFN3 (Asia) exhibits high heat resistance, good dielectric strength, dimensional stability, hydrolytic stability, and very low moisture absorption. It offers low creep sensitivity, good stiffness and low warpage, shrinkage & specific gravity. This material is an excellent candidate for a variety of applications such as solar frames, unattended power supply (UPS) inverter, charger, indoor and outdoor electrical enclosures, housings, connectors and wall plates, sockets & switches. It is suitable for automotive EV, electronic and electrical industrial applications such as energy management, mobile phones, computers and tablets.

NORYL™ Resin SE1GFN3 (Americas) by SABIC is a PFAS-free, 30% glass fiber reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS). This injection moldable grade contains non-brominated, non-chlorinated & non-halogenated flame retardant and carries a UL94 flame rating of V-1 at 1.5 mm along with UL746C outdoor suitability rating of F1 and RTI of 110°C. NORYL™ Resin SE1GFN3 (Americas) exhibits high heat resistance, good dielectric strength, dimensional stability, hydrolytic stability, and very low moisture absorption. It offers low creep sensitivity, good stiffness and low warpage, shrinkage & specific gravity. This material is an excellent candidate for a variety of applications such as solar frames, unattended power supply (UPS) inverter, charger, indoor and outdoor electrical enclosures, housings, connectors and wall plates, sockets & switches. It is suitable for automotive EV, electronic and electrical industrial applications such as energy management, mobile phones, computers and tablets.

ULTEM™ resin 1010 by SABIC is a general purpose, amorphous, metallizable, flame-retardant polyetherimide (PEI) grade. It offers high flow, durability, excellent mechanical properties and dimensional stability. It provides easy processability, low toxicity and smoke evolution. Exhibits hydrolytic stability, low creep sensitivity, low shrinkage, high electric breakdown strength (BDS), UV-C and radiation resistance (gamma, x-ray). It provides high heat resistance, chemical resistance and stability of physical & mechanical properties at elevated temperatures with high strength, modulus and stiffness up to 200°C. It retains strength and resists stress cracking when exposed to automotive, aircraft and hydrolytic fluids, aliphatic hydrocarbons, alcohols, acids and weak aqueous solutions. Shows good metal adhesion and is transparent to microwave radiation & near IR. ULTEM™ resin 1010 is suitable for processing by injection molding, additive manufacturing, extrusion blow molding, film-, foam & profile extrusion, compression molding, extrusion compounding, hot rolling and injection compression molding. Recommended for rigid packaging, aircraft interiors, defense, outdoor lawn & landscape, semiconductors, fossil, electric vehicle, heavy truck, automotive interiors, electrical devices & displays and specialty vehicles. It is also used in ophthalmics, rail, wind energy, sport/leisure, consumer packaging, personal accessory, textile, lighting, energy storage, home appliances, servomotor, bus, and electronic material handling. Suitable for electrical components & infrastructure, personal recreation, industrial material handling, composite, automotive under the hood, commercial appliance and recreational vehicle. It complies with RoHS, aerospace FAR 25.853, UL 94 V-0 and 94 5VA flame rating.
ISCC+ certified bio-based version also available for this grade.

ULTEM™ resin 2100 (Asia) by SABIC is an amorphous, general-purpose polyetherimide (PEI) reinforced with 10% glass fiber. Offers good chemical resistance and high heat resistance. It is a standard flow, flame retardant grade with low toxicity and smoke evolution.

• Provides high stiffness, strength, hydrolytic stability, low creep sensitivity and low shrinkage.
• Exhibits good mechanicals in broad temperature range, good metal adhesion and dimensional stability.
• It is suitable for processing by injection molding.
• Recommended for rigid packaging, mass transportation (aircraft interiors, heavy truck, bus, specialty vehicles, servomotor), industrial, electrical components, electronics material handling, building & construction, hydrocarbon & wind energy and consumer applications.
• It is also used in defense, automotive interior & under the hood, sports & leisure, semiconductors, home & commercial appliance, lawn and landscape.
• ULTEM™ resin 2100 (Asia) is UL 94 V-0 and 94 5VA flame rated.
• Complies with ECO regulations and meets NSF 51 listing and WRAS certification.

ISCC+ certified bio-based version also available for this grade.

ULTEM™ resin 2300 (Asia) by SABIC is a flame retardant, general purpose, amorphous polyetherimide (PEI) reinforced with 30% glass fiber. Offers standard flow, good chemical resistance and high heat resistance. Provides high stiffness, strength, hydrolytic stability, low creep sensitivity and low shrinkage. Exhibits good mechanicals in broad temperature range, good metal adhesion and dimensional stability. It shows low toxicity and smoke evolution. It is suitable for processing by injection molding. Recommended for rigid packaging, mass transportation (aircraft interiors, heavy truck, bus, specialty vehicles, servomotor), industrial, electrical components, electronics material handling, building & construction, hydrocarbon & wind energy and consumer applications. It is also used in defense, automotive interior & under the hood, sports & leisure, semiconductors, home & commercial appliance, lawn and landscape. ULTEM™ resin 2300 (Asia) is UL 94 V-0 flame rated. Complies with ECO regulations, NSF 51, KTW and WRAS certification.
ISCC+ certified bio-based version also available for this grade.