Plastics and elastomers for Extrusion

ULTEM™ resin 1000 by SABIC is amorphous, transparent, flame-retarded polyetherimide (PEI) grade. It is metallizable and transparent to microwave radiation & near IR. Provides high stiffness, strength, hydrolytic stability, low creep sensitivity, shrinkage, good metal adhesion, low smoke and toxicity. Offers radiation resistance (gamma, x-ray), chemical-, UV-C resistance, high electric breakdown strength (BDS) and high heat resistance. Exhibits excellent mechanicals in broad temperature range, good dimensional stability and excellent electrical properties. ULTEM™ resin 1000 is suitable for processing by additive manufacturing, injection compression molding, compression molding, foam-, film- & profile extrusion, injection molding, extrusion blow molding and extrusion compounding. Used in rigid packaging, aircraft interiors, defense, outdoor, lawn & landscape, semiconductors, fossil, electric vehicle, heavy truck, automotive interiors, electrical devices & displays, specialty vehicles, ophthalmics, rail, wind energy, sport/leisure, consumer packaging. It is also recommended for personal accessory, textile, lighting, energy storage, home appliances, servomotor, bus, electronic, electrical components, industrial, automotive under the hood, commercial appliance and recreational vehicle. Complies with RoHS, UL94 V-0, V-2 and 5V ratings and aerospace FAR 25.853. The natural, uncolored, material is halogen-free according to standards IEC 61249-2-21, IPC 4101E and JEDEC JS709B. The base material is transparent amber colored but is also available in custom colors- transparent and opaque.
ISCC+ certified bio-based version also available for this grade.

SILTEM™ Resin STM1500 (Europe) by SABIC is a PFAS-free, flexible polyetherimide(PEI)-siloxane copolymer for cable and wire coatings. Offers high tensile elongation, chemical resistance- & heat resistance and good dimensional stability. It is a non-halogenated flame retardant grade. Exhibits low corrosivity & toxicity and smoke emission. SILTEM™ Resin STM1500 (Europe) can be processed by extrusion. Used in aerospace, defense, mass transportation like rail, electronics, material handling, electricals and industrial material handling. Complies with RoHS and UL 94 V-1 flame rating.

Xytron™ U3020E (R-X08286A) by Envalior is a flame retardant, polyphenylene sulfide.

• It exhibits high viscosity & chemical resistance and offers improved impact properties.
• Xytron™ U3020E (R-X08286A) can be processed by injection molding & extrusion.

ForTii® Ace XTR31S by Envalior is an unreinforced, lubricated, medium/high viscosity, PPA (PA4T). This high-temperature polyamide has excellent viscosity stability, chemical resistance, barrier performance and stable processing. It is used in many coextrusion and pultrusion processes.

Akulon® F130-C1 by Envalior is a lubricated, medium viscosity polyamide 6 grade. It has good food contact quality and offers good chemical resistance to various solvents. Used in consumer goods and packaging for sterilized surgical devices. Suggested for biaxially oriented films (BOPA) for cheese-, fish-, meat- and medical packaging applications. Akulon® F130-C1 is suitable for processing by cast film extrusion.

FLEX NORYL™ Resin WCA875 (Americas) by SABIC is a PFAS-free, flexible, impact resistant, non chlorinated/brominated & non-halogenated flame retardant, unreinforced extrudable blend of polyphenylene ether (PPE) + thermoplastic elastomer (TPE). FLEX NORYL™ Resin WCA875 (Americas) is recommended for wire insulation applications in dark colors. It exhibits superior thermal stability, very low water absorption, good electric properties & processability, and low specific gravity. It can be processed by wire coating extrusion. It offers hydrolytic stability, low warpage, thin wall, low moisture absorption, creep resistant, dimensional stability. It is suitable for electrical and electronic applications such as mobile phones, computers and tablets. This material is capable of meeting UL VW-1 requirements, 105°C end use temperature rating, and heat deformation performance as defined by UL 1581.

ULTEM™ resin 1010 by SABIC is a general purpose, amorphous, metallizable, flame-retardant polyetherimide (PEI) grade. It offers high flow, durability, excellent mechanical properties and dimensional stability. It provides easy processability, low toxicity and smoke evolution. Exhibits hydrolytic stability, low creep sensitivity, low shrinkage, high electric breakdown strength (BDS), UV-C and radiation resistance (gamma, x-ray). It provides high heat resistance, chemical resistance and stability of physical & mechanical properties at elevated temperatures with high strength, modulus and stiffness up to 200°C. It retains strength and resists stress cracking when exposed to automotive, aircraft and hydrolytic fluids, aliphatic hydrocarbons, alcohols, acids and weak aqueous solutions. Shows good metal adhesion and is transparent to microwave radiation & near IR. ULTEM™ resin 1010 is suitable for processing by injection molding, additive manufacturing, extrusion blow molding, film-, foam & profile extrusion, compression molding, extrusion compounding, hot rolling and injection compression molding. Recommended for rigid packaging, aircraft interiors, defense, outdoor lawn & landscape, semiconductors, fossil, electric vehicle, heavy truck, automotive interiors, electrical devices & displays and specialty vehicles. It is also used in ophthalmics, rail, wind energy, sport/leisure, consumer packaging, personal accessory, textile, lighting, energy storage, home appliances, servomotor, bus, and electronic material handling. Suitable for electrical components & infrastructure, personal recreation, industrial material handling, composite, automotive under the hood, commercial appliance and recreational vehicle. It complies with RoHS, aerospace FAR 25.853, UL 94 V-0 and 94 5VA flame rating.
ISCC+ certified bio-based version also available for this grade.

Arnite® A06 700 by Envalior is a very high viscosity, high impact polyethylene terephthalate (PET) food contact grade. Exhibits high strength and rigidity with excellent processing characteristics. Offers low creep, high strings tension vertical and horizontal. It is suitable for processing by extrusion and injection molding. Arnite® A06 700 is used in tennis racket strings.

NORYL™ Resin EN265 (Americas) by SABIC is a non-reinforced, heat stabilized blend of polyphenylene ether (PPE) and high impact polystyrene (HIPS). It is a high heat, flame retarded halogen-free, non-chlorinated and non-brominated alloy. It exhibits excellent impact strength, very low moisture absorption and great machinability. It offers low warpage, hydrolytic stability, outdoor weatherability and good dimensional stability. It is processed by extrusion. It is used in indoor and outdoor electrical applications including trunking and conduit. It is also used in electronics, electrical devices, displays, components and infrastructure. NORYL™ Resin EN265 (Americas) is recommended for healthcare, pharmaceutical, building and construction and mass transportation such as specialty vehicles. Complies with UL 94 V-1, V-0 flame rating.

ULTEM™ resin HU1010 by SABIC is an unreinforced, amorphous, high stiffness polyetherimide (PEI) resin that may offer a high glass transition temperature (Tg) of 217°C and improved flow. It offers steam-, peroxide-, gamma-, EtO-, UV-C- and E-beam resistance for repeated sterilization cycles. It features excellent mechanical, electrical and dimensional properties up to high temperatures. It provides very good chemical resistance for an amorphous material. It provides hydrolytic stability, low smoke and toxicity. It exhibits low creep sensitivity, low shrinkage, good metal adhesion, high strength and high heat resistance. It is transparent amber colored but is also available in custom colors - transparent and opaque. It is suitable for additive manufacturing, injection compression molding, compression molding, foam extrusion, extrusion blow molding, film extrusion, injection molding, profile extrusion, extrusion and extrusion compounding. ULTEM™ resin HU1010 is designed for pharmaceutical, surgical, ophthalmics, personal accessory, respiratory, sleep therapy, personal recreation, healthcare, patient testing, fluid and blood handling, medical facility and infrastructure. It is an inherent flame retardant offering UL94 V0 and 5V ratings. It is biocompatible (ISO 10993 or USP Class VI) and healthcare management of change applies. The grade is RoHS- and food compliant (FDA, CN, EC).