Return to supplier page
FUJICURE 5003-D by Sanho Chemical is a modified cycloaliphatic polyamine. It acts as a curing agent offering excellent curing under high humid conditions and on the surface of damp. FUJICURE 5003-D is suitable for coating applications. Recommended dosage level is 50-70 parts by weight to 100 parts of bisphenol-A liquid for EEW 190. FUJICURE FX-220 by Sanho Chemical is a modified cycloaliphatic mannish type curing agent. It is designed for epoxy resin. It offers excellent curing under high humidity and low temperature. FUJICURE FX-220 is used in coating applications. Recommended dosage level is 30-50 parts by weight to 100 parts of bisphenol-A liquid for EEW 190. FUJICURE FXI-919 by Sanho Chemical is a modified poly aromatic amine resin designed for waterborne coatings. It acts as a curing agent and provides fast drying rate under low temperature. It is compatible with liquid epoxy resin and can be diluted in water. It offers good adhesion strength and suitable toughness to various substrates. FUJICURE FXI-919 is suitable for primer applications. Recommended dosage level is 80-100 parts by weight to 100 parts of liquid epoxy resin for EEW 190. FUJICURE 4030 by Sanho Chemical is a modified aromatic polyamine. It acts as a solvent type epoxy curing agent providing high performance epoxy paint for low temperature and wet surface. It offers superior anti-chemical resistance and water resistance. It can be diluted in xylene/isobutanol (70/30). FUJICURE 4030 is suitable for coating applications such as tar-epoxy system and enamel type. Recommended dosage level is 70-100 parts by weight for EEW 190. FUJICURE FXM-823B by Sanho Chemical is a modified aromatic amine-based curing agent. It is compatible with coal tar and liquid epoxy resin. It is designed to operate at low temperature of 0°C. It offers excellent pigment wetting properties and chemical resistance to mineral acids, alkali & organic acids. FUJICURE FXM-823B is used in coatings for corrosive environments such as chemical and oil tanks, dark colored flooring & coal tar-epoxy coatings. Recommended dosage level for EEW 190 is 40-60 parts by weight. FUJICURE 5000 by Sanho Chemical is a low viscosity curing agent of modified cycloaliphatic polyamine. It is compatible with epoxy resin. It offers excellent shaping and curing in high humidity. FUJICURE 5000 is recommended for solvent-based coatings. Recommended dosage level is 50-70 parts by weight to 100 parts of bisphenol-A liquid for EEW 190. FUJICURE 5003 by Sanho Chemical is a curing agent of modified cycloaliphatic polyamine. It is compatible with epoxy resin and coal tar. It offers excellent curing in high humidity and on the surface of damp. It shows good chemical and blush resistance. FUJICURE 5003 is suitable for coating applications. Recommended dosage level is 45-55 parts by weight to 100 parts of bisphenol-A liquid for EEW 190. FUJICURE 5300 by Sanho Chemical is a low viscosity curing agent based on modified cycloaliphatic polyamine. It shows compatibility with epoxy resin and coal tar. It offers excellent shaping and curing in high humidity. FUJICURE 5300 is suitable for use in self-leveling coating applications. Recommended dosage level is 45-65 parts by weight to 100 parts of bisphenol-A liquid for EEW 190. FUJICURE FXM-824A by Sanho Chemical is a modified activated aromatic amine curing agent for liquid epoxy resin. It can cure below ambient temperature and shows excellent all-round chemical resistance. It offers fast curing with a short pot-life. FUJICURE FXM-824A is suitable for coatings. Recommended dosage level is 40-60 phr to 100 parts of liquid epoxy resin for EEW 190. FUJICURE 5250 by Sanho Chemical is a modified cycloaliphatic polyamine. It acts as a curing agent offering excellent gloss and superior curing at low temperature. It shows good compatibility with epoxy resins. It exhibits superior water resistance and chemical resistance. FUJICURE 5250 is suitable for coating applications. Recommended dosage level is 60-80 parts by weight to 100 parts of bisphenol-A liquid for EEW 190.
FUJICURE
Coating ingredients supplied by Sanho Chemical