Return to supplier page
Raybo 43 MarHard by Raybo Chemical Company is silicon free mixture of xylene and ethyl benzene. It acts as a scratch and mar resistant. It reduces the coefficient of friction of the film surface. Raybo 43 MarHard is not intended to increase the toughness of the film and does not exude from the film or produce a greasy surface. Total usage is 0.5-1% of the total volume. The typical use levels are 0.3-3%. It complies with following regulations OSHA regulations, SARA 313 and CERCLA. Mixture of xylene and ethyl benzene. Raybo 66 AquaHamR by Raybo Chemical Company acts as a hammer-tone finish agent. It produces a unique hammertone pattern and a reproducible pattern that is easily achieved. Suitable for VOC compliant coatings. The typical use levels are 0.5-1% of the total paint. Raybo 66 AquaHamR by Raybo Chemical Company complies with following regulations: OSHA regulations, CERCLA and SARA 313. Solvent naptha, cyclohexanol, naphthalene and 1, 2, 4 trimethylbenzene. Raybo 158 VisCon HF by Raybo Chemical Company acts as a rheology modifier. It controls viscosity and sagging. It does not cause puffing and does not introduce thixotropy to the system. The total usage is 1-3% of the total vehicle solids. Raybo 158 VisCon HF by Raybo Chemical Company complies with following regulations: OSHA regulations, SARA 313 and CERCLA. Raybo 80 NoRust by Raybo Chemical Company is mixture of sodium nitrite, sodium benzoate and 2-dimethylaminoethanol. Acts as a flash-rust corrosion inhibitor. It protects micro-cracked lined containers. Suitable for in-can protection coatings. The typical use levels are 1-2%. Raybo 80 NoRust complies with following regulations: OSHA regulations, SARA 313 and CERCLA. Raybo 90 NoRust NF by Raybo Chemical Company is Nitrite-free mixture of N-butylamine, cyclicamine, ammonium benzoate, fatty acid/amine complex and molybdenum. Acts as a flash-rust corrosion inhibitor. It protects micro-cracked lined containers. It provides vapor phase in-can protection and flash rust protection in a wide variety of resin systems. It protects micro-cracked lined containers. Used in direct to metal and in-can protection coatings. The typical use levels are 1-2%. Raybo 90 NoRust NF complies with following regulations: OSHA regulations, SARA hazard categories and CERCLA. Mixture of ethanol and ethyl acetate. Raybo 68 HydroSlip by Raybo Chemical Company acts as a scratch/mar resistant and anti-blocking agent. It improves mar resistance increases slip and provides flow control. Raybo 68 HydroSlip by Raybo Chemical Company is HAP free and is effective at low concentrations. Total usage is 0.3-2% of the total weight. It complies with following regulations: OSHA regulations and CERCLA. Mixture of solvent naptha, ethanol, methanol, methyl isobutyl ketone, ethyl acetate and N-heptane. Raybo 61 AquaWet by Raybo Chemical Company acts as a dispersing agent and wetting agent. It effectively eliminates fisheyes, craters and crawling in water-based systems. It improves adhesion over damp and unprepared substrates and reduces water sensitivity during cure. Raybo 61 AquaWet by Raybo Chemical Company is compatible with alkyd resins. It is applicable to both organic and inorganic pigments. It complies with following regulations: OSHA regulations, CERCLA and SARA 313. Mixture of solvent naphtha and hexylene glycol. Raybo 94 Susperse B by Raybo Chemical Company acts as a surfactant and dispersing agent. It improves sag resistance and pigment suspension without significant increases in viscosity. It does not produce side effects such as loss of adhesion, reduced gloss and film softening. It has high system compatibility. Raybo 94 Susperse B by Raybo Chemical Company complies with following regulations: OSHA regulations and SARA hazard categories. Raybo 41 Spangle by Raybo Chemical Company acts as a optical brightener. It is a mixture of xylene, alkylamine, fatty acid ester, fatty acid amine salt and ethyl benzene. It improves brightness and stability of leafing aluminum pigments. It also prevents gas formation. It is compatible with alkyd, epoxy resins, polyurethane and vinyls. Raybo 41 Spangle by Raybo Chemical Company is suitable for solvent and water reducible coatings. Its recommended dosage level for solvent system and water reducible coatings is 1–2% of total vehicle. Raybo 3 AntiSilk by Raybo Chemical Company acts as surface conditioners and modifiers. It is highly effective in controlling silking, floating and flooding. It is also useful in the control of fisheyes, craters, and orange peeling. It is an effective fluidizer. It is also effective in eliminating pigment flooding. It is helpful in reducing or eliminating micro wrinkling, greatly improving both gloss and clarity. It produces immediate results which will remain stable during storage. Raybo 3 AntiSilk by Raybo Chemical Company is effective in most solvent systems and can also be used in water reducible alkyds. It is suitable for automotive finishes. It complies with following regulations: OSHA regulations, CERCLA and SARA 313. Raybo 3 AntiSilk has an additional dosage level of 0.2 – 2% of total weight.
Raybo
Coating ingredients supplied by Raybo Chemical Company