Tallicin®

Coating ingredients supplied by Pflaumer Brothers

43 Products match your search

Tallicin® K-9

by Pflaumer Brothers

Tallicin® K-9 by Pflaumer Brothers is a polymeric dispersant with multiple anchor groups that can be used to disperse inorganic and organic pigments. It improves pigment wetting, color development and storage stability. It is used in solvent-based coatings, industrial maintenance coatings, offset inks and powder coatings. <ul style="padding-left: 40px;"><li>It is effective in reducing viscosity for dispersions of both oxidized and non-oxidized carbon black. </li> <li>It allows the formulator to increase the pigment loading in the mill base, thus improving both efficiency and cost of production. </li> <li>Recommended dosage level is 2 and 20% based upon pigment weight if the surface area of the pigment is unknown. </li></ul>

Support available
Original documents

See the product

Tallicin® K-8

by Pflaumer Brothers

Tallicin® K-8 by Pflaumer Brothers acts as a dispersing agent. It helps produce a high gloss effect as it eliminates bubbles and craters seen in dip tank applications. it is used to disperse inorganic and organic pigments in a variety of systems such as solvent-based coatings, inks, powder coatings. <ul style="padding-left: 40px;"><li>it improves pigment wetting, color development, and storage stability. </li> <li>Tallicin® K-8 allows the formulator to reduce the viscosity or increase the pigment loading in the mill base thus improving both efficiency and cost of production. </li> <li>it is used in industrial maintenance coatings, offset inks, and product finishes. </li> <li>Recommended dosage level is 2 and 20% based upon pigment weight if the surface area of the pigment is unknown. </li></ul>

Support available
Original documents

See the product

Tallicin® EXP E-26

by Pflaumer Brothers

Tallicin® EXP E-26 by Pflaumer Brothers is a formulated emulsion of castor oil polyol for 3-component polyurethane polymer concrete. It can be used by itself as part A or can be modified with various additives to achieve special performance characteristics. It is odorless, non-porous, relatively non-toxic, essentially zero-VOC, and USDA accepted grade. <ul style="padding-left: 40px;"><li>It is available in wide range of colors. </li> <li>It is suitable for the formulation of floor coatings and polymer mortars for a variety of applications. </li> <li>It should be used only with Teracure® M-60 as the hardener. </li> <li>Tallicin® EXP E-26 is designed for areas where cleanliness and long-lasting durability are critical. </li> <li>It provides excellent performance characteristics including resistance to impact, abrasion, aggressive chemicals, acid attack, and thermal shock. </li> <li>It provides no BPA compared with epoxies. </li> <li>It has shelf life of 6 months. </li></ul>

Sustainable option
Support available
Original documents

See the product

Tallicin® E-27

by Pflaumer Brothers

Tallicin® E-27 by Pflaumer Brothers is a water-based castor oil polyol emulsion for 3-component polyurethane polymer concrete. It can be used by itself as Part A or can be modified with various additives to achieve special performance characteristics. It is used for concrete floor coatings that provide exceptional flow and leveling, extended working time for easy application. <ul style="padding-left: 40px;"><li>It is available in wide range of colors and is easy to clean with solvents or detergent. </li> <li>It requires one-step application-no topcoat needed. </li> <li>It can be applied at <40°F and can be steam cleaned. </li> <li>It provides excellent results in appearance, durability and maintenance. </li> <li>It offers resistance to impact, abrasion, aggressive chemicals, acid attack, and thermal shock. </li> <li>It should be used only with Teracure® M-65 as the hardener. </li> <li>Urethane polymer concrete based on Tallicin® E-27 is also odorless, non-porous, relatively nontoxic, essentially zero-VOC, and USDA accepted for use in food plant operations. </li> <li>It has shelf life of 6 months. </li></ul>

Sustainable option
Support available
Original documents

See the product

Tallicin® K-7

by Pflaumer Brothers

Tallicin® K-7 by Pflaumer Brothers acts as a dispersing agent and efficient flushing aid. It has multiple cationic anchor groups that can be used to disperse inorganic and organic pigments. It is suitable for systems containing petroleum oils or solvents traditionally used in offset ink, publication gravure and industrial maintenance coatings. <ul style="padding-left: 40px;"><li>It improves pigment wetting, color development and storage stability. </li> <li>It offers reduced viscosity, higher brightness and gloss.</li> <li>It allows a formulator to reduce the viscosity of the millbase or increase the pigment loading. </li> <li>It reduces production time leading to improved efficiency in the production of flushed colorants and lower cost production. </li> <li>Recommended dosage level is 5-20% based upon dry organic pigment weight and 2-5% on the dry weight of inorganic pigment and 5-7% of the dry pigment weight for flushed colors. </li></ul>

Support available
Original documents

See the product

Tallicin® Dispersant K-2

by Pflaumer Brothers

Tallicin® Dispersant K-2 by Pflaumer Brothers is a solvent-based wetting and dispersing agent for both organic and inorganic pigments. It is suitable for all systems containing petroleum solvents, petroleum oils, and oxygenated solvents. It is effective for vehicle types such as alkyds, acrylics, drying oils, saturated polyesters, epoxy esters, two-component epoxies, oil-modified urethanes, vinyls and amino resins. <ul style="padding-left: 40px;"><li>Its well-balanced surface-active functionality optimizes the dispersion of almost all pigments and extenders, including such difficult to disperse pigments as phthalo blue, phthalo green and carbon black. </li> <li> It overcomes the problems like flocculation, flooding, floating and color development. </li> <li>It is most effective for titanium dioxide. </li> <li>Tint color more readily accepted into white base offering higher pigment loadings. </li> <li>It is used in coatings applications.</li> <li>Recommended dosage level is 0.5-2.0% based on inorganic pigments and 2.0-4.0% based on organic pigments. </li></ul>

Support available
Original documents

See the product

Tallicin® 3000

by Pflaumer Brothers

Tallicin® 3000 by Pflaumer Brothers is a pot life extender for 2K polyurethane systems catalyzed with trimer type aliphatic polyisocyanates. It is added to the polyol component and acts to "block" the hydroxyl groups from reacting with the isocyanate, in many cases doubling the pot life of the system. It helps in extending the use requirements for trimer-type polyurethanes designed to meet today's needs for high solids and high performance. <ul style="padding-left: 40px;"><li>It acts through the process of evaporation with the dry times typically extended. </li> <li>It is compatible with polyester, polyether, polyacrylate resins and functions well in all systems. </li> <li>Promotes wet edge and open time in pigmented systems and can be used with organotin and tertiary amine cure promoters. </li> <li>Its applications include automotive, transport, coil, plastics, industrial and marine coatings. </li> <li>Recommended dosage level is 1.0% to 1.5% by weight of the polyol and its higher level may be required in systems having a relatively short pot life. </li> <li>Tallicin® 3000 has shelf life of 9 months from date of shipment. </li></ul>

Support available
Original documents

See the product

Tallicin® 2570

by Pflaumer Brothers

Tallicin® 2570 by Pflaumer Brothers is a silicone-free lubricant. It is a completely water-soluble phosphate ester-based extreme pressure anti-wear additive that can be incorporated into synthetic and semi-synthetic formulations with neutralization. It provides improved flow and leveling in high solids coatings. <ul style="padding-left: 40px;"><li>It offers excellent compatibility and improved gloss & overall appearance. </li> <li>It eliminates craters, bubbles & pinholes and imparts good brushability and open time. </li> <li>Recommended dosage level is 2-10%. </li></ul>

Support available
Original documents

See the product

Tallicin® KO

by Pflaumer Brothers

Tallicin® KO by Pflaumer Brothers acts as an emulsifier, dispersing and wetting agent. It is designed to disperse hydrophobic pigments into a low-viscosity paste for incorporation into either oil or water-based systems, both water-reducible and latex. It is compatible with a wide variety of pigments and solvent-based vehicles. <ul style="padding-left: 40px;"><li>When used in a water-based system in conjunction with relatively hydrophilic surfactants, it imparts good color acceptance and development with high oil-absorbing pigments. </li> <li>It can be used to emulsify linseed oil in water. </li> <li>Recommended dosage is 2% by weight of pigment. </li></ul>

Support available
Original documents

See the product

Tallicin® 1500

by Pflaumer Brothers

Tallicin® 1500 by Pflaumer Brothers acts as a flow and levelling agent. It is silicone-free and fugitive from the film. It improves sharpness of gloss, eliminate bubbling, cratering and pinholes without adverse effect on other formulation’s properties such as chemical and water resistance. <ul style="padding-left: 40px;"><li>It contributes to inter-coat adhesion and eliminates surface defects, particularly in high solids applications. </li> <li>It exhibits extremely high solvency and a very low evaporation rate. </li> <li>It has demonstrated wide compatibility with most vehicles and coatings systems. </li> <li>It reduces the viscosity of alkyd formulations and improve the flow characteristics of nitrocellulose lacquers and of both two-component and oil-modified urethane systems. </li> <li>It offers good brushability. </li> <li>Tallicin® 1500 is applicable for lacquers, spray systems, baking finishes, gloss paints, coatings and varnishes. </li> <li>Recommended dosage level is 2-3%, based on total weight to provide good flow, leveling, wet edge and open time. </li></ul>