Return to supplier page
NAM- UA33H by Nagase Specialty Materials is an aliphatic urethane acrylate oligomer. Its functionality value is 9. Used extensively in the ultraviolet (UV) and electron beam (EB) curing of inks and coatings. NAM- 110S by Nagase Specialty Materials is a caprolactone-modified tetrahydrofurfuryl acrylate. Offers good flexibility, low skin irritation, fast cure speed and has low odor. Used extensively in the ultraviolet (UV) and electron beam (EB) curing of inks and coatings. It is registered in TSCA. NAM- UA53H by Nagase Specialty Materials is an aliphatic urethane acrylate oligomer. Its functionality value is 6. Used extensively in the ultraviolet (UV) and electron beam (EB) curing of inks and coatings. NAM- UX5000 by Nagase Specialty Materials is an aliphatic urethane acrylate oligomer. Its functionality value is 6. Provides rigidity, toughness, high hardness and scratch resistance. Used extensively in the ultraviolet (UV) and electron beam (EB) curing of inks and coatings. NAM-60G by Nagase Specialty Materials is a phenoxy polyethyleneglycol acrylate (6EO-PEA). It is an excellent viscosity reducer and has low viscosity. Designed for use in ultraviolet (UV) and electron beam (EB) curing of inks and coatings. It is registered in TSCA. NAM-IBXA by Nagase Specialty Materials is a isobornyl acrylate. Offers low shrinkage, excellent abrasion resistance, excellent viscosity reducer and has low toxicity. Used extensively in the ultraviolet (UV) and electron beam (EB) curing of inks and coatings. NAM-IBXA is registered in TSCA. NAM -D310 by Nagase Specialty Materials is an alkyloyl-modified dipentaerythritol pentaarylate (RO-DPPA). It has low odor. Provides fast cure speed, excellent hardness and abrasion resistance, high crosslink density, low skin irritation and excellent adhesion. Designed for use in ultraviolet (UV) and electron beam (EB) curing of inks and coatings. NAM- 128H by Nagase Specialty Materials is a 2-Hydroxy 3-phenoxy propyl acrylate. Offers good flexibility, good adhesion, fast cure speed and has low odor. Used extensively in the ultraviolet (UV) and electron beam (EB) curing of inks and coatings. It is registered in TSCA. NAM-15HA by Nagase Specialty Materials is an aliphatic urethane acrylate oligomer. Its functionality value is 15. Used extensively in the ultraviolet (UV) and electron beam (EB) curing of inks and coatings. NAM- CCR S by Nagase Specialty Materials is acid-modified cresol novolac epoxy acrylate oligomer. Exhibits heat resistance. Used extensively in the ultraviolet (UV) and electron beam (EB) curing of inks and coatings.
NAM-
Coating ingredients supplied by Nagase Specialty Materials